Influence of fuel feeding positions on gasification in dual fluidized bed gasifiers

An in-bed and an on-bed feeding system are implemented in a dual fluidized bed gasifier in order to investigate the influence of the fuel feeding position on the gasification process. Two bed materials, fresh and used olivine, are used because of their varying catalytic activity. The comparison of in-bed and on-bed feeding of wood pellets shows that in-bed feeding is more favorable, because lower tar concentrations are achieved and the gas composition is closer to water gas shift equilibrium. Better mixing of bed material and fuel particles occurs with in-bed feeding. The residence time of the gas phase in the fluidized bed is longer in the case of in-bed feeding, and therefore better performance of the gasifier is achieved. Sufficient residence time of the fuel in the bubbling bed is important when a less active bed material is used. More active bed material is capable of compensating for the shorter residence time of the gas phase in contact with bed material during on-bed feeding. (C) 2013 Elsevier Ltd. All rights reserved.