Boosting the Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 by Atomic Layer-Deposited CeO2 Coating

It has been demonstrated that atomic layer deposition (ALD) provides an initially safeguarding, uniform ultrathin film of controllable thickness for lithium-ion battery electrodes. In this work, CeO2 thin films were deposited to modify the surface of lithium-rich Li1.2Mn0.54Ni0.13Co0.13O2 (LRNMC) particles via ALD. The film thicknesses were measured by transmission electron microscopy. For electro-chemical performance, similar to 2.5 nm CeO2 film, deposited by 50 ALD cycles (50Ce), was found to have the optimal thickness. At a 1 C rate and 55 degrees C in a voltage range of 2.0-4.8 V, an initial capacity of 199 mAh/g was achieved, which was 8% higher than that of the uncoated (UC) LRNMC particles. Also, 60.2% of the initial capacity was retained after 400 cycles of charge-discharge, compared to 22% capacity retention of UC after only 180 cycles of charge-discharge. A robust kinetic of electrochemical reaction was found on the CeO2-coated samples at 55 degrees C through electrochemical impedance spectroscopy. The conductivity of 50Ce was observed to be around 3 times higher than that of UC at 60-140 degrees C. The function of the CeO2 thin-film coating was interpreted as being to increase substrate conductivity and to block the dissolution of metal ions during the charge-discharge process.