Characterization of a Plate Specimen from Phase I of the NRC/EPRI Weld Residual Stress Program

被引：0

作者：

Kerr, Matthew ^{[1
]}

Rudland, David L. ^{[1
]}

Prime, Michael B.

Swenson, Hunter

Buechler, Miles A.

Clausen, Bjorn

机构：

[1] US Nucl Regulatory Commiss, Off Nucl Regulatory Res, Washington, DC 20555 USA

来源：

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B | 2012年

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Time-of-flight neutron diffraction and contour method residual stress measurements were conducted at Los Alamos National Lab (LANL) on a lab sized plate specimen (P4) from Phase I of the joint U.S. Nuclear Regulatory Commission and Electric Power Research Institute Weld Residual Stress (NRC/EPRI WRS) program. The specimen was fabricated from a 304L stainless steel plate containing a seven pass Alloy 82 groove weld, restrained during welding and removed from the restraint for residual stress characterization. This paper presents neutron diffraction and contour method results, and compares these experimental stress measurements to a WRS Finite Element (FE) model. Finally details are provided on the procedure used to calculate the residual stress distribution in the restrained or as welded condition in order to allow comparison to other residual stress data collected as part of the EPRI lead Phase I WRS program.

引用

页码：1579 / 1587

页数：9

共 50 条

[1] NRC/EPRI RESIDUAL STRESS VALIDATION PROGRAM PHASE 1-EXPERIMENTAL SPECIMEN MODELING AND MEASUREMENT
Broussard, J.
Crooker, P.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 1557 - 1564
[2] NRC/EPRI Welding Residual Stress Validation Program - Phase III
Kerr, M.
Fredette, L. F.
Rathbun, H. J.
Broussard, J. E.
15TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS-WATER REACTORS, 2011, : 1155 - 1165
[3] NRC/EPRI Welding Residual Stress Validation Program - Phase III Details and Findings
Fredette, Lee F.
Kerr, Matthew
Rathbun, Howard J.
Broussard, John E.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 1547 - 1555
[4] Measurement and prediction of residual stress in a bead-on-plate weld benchmark specimen
Ficquet, X.
Smith, D. J.
Truman, C. E.
Kingston, E. J.
Dennis, R. J.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (01) : 20 - 30
[5] SUMMARY OF FINITE ELEMENT (FE) SENSITIVITY STUDIES CONDUCTED IN SUPPORT OF THE NRC/EPRI WELDING RESIDUAL STRESS (WRS) PROGRAM
Kerr, Matthew
Rathbun, Howard J.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2012, VOL 6, PTS A AND B, 2012, : 1297 - 1307
[6] The NeT residual stress measurement and modelling round robin on a single weld bead-on-plate specimen
Truman, C. E.
Smith, M. C.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (01) : 1 - 2
[7] Measurement of the Residual Stress Tensor in a Compact Tension Weld Specimen
Traore, Y.
Paddea, S.
Bouchard, P. J.
Gharghouri, M. A.
EXPERIMENTAL MECHANICS, 2013, 53 (04) : 605 - 618
[8] Measurement of the Residual Stress Tensor in a Compact Tension Weld Specimen
Y. Traore
S. Paddea
P. J. Bouchard
M. A. Gharghouri
Experimental Mechanics, 2013, 53 : 605 - 618
[9] Measurement of the residual stress tensor in a compact tension weld specimen
Traore, Y. (y.traore@open.ac.uk), 1600, Society for Experimental Mechanics Inc. (53):
[10] Weld characterization and residual stress measurements for TC-128B steel plate
Sutton, MA
Abdelmajid, I
Zhao, W
Wang, D
Hubbard, C
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2002, 124 (04): : 405 - 414

← 1 2 3 4 5 →