Improvement of Adhesive Behavior of Ballistic Woven Aramid by Atmospheric Pressure Plasma Treatment

被引：0
|
作者：
Martinez, M-A [1 ]
Giner, J-M [2 ]
Encinas, N. [1 ]
Abenojar, J. [1 ]
机构：
[1] Univ Carlos III Madrid, Mat Sci & Engn Dept, Av Univ 30, Leganes 28911, Spain
[2] Univ Valencia, EPS Alcoy, Dept Mech & Mat Engn, E-03801 Alcoy, Spain
来源：
9TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY: 2020 - SCIENTIFIC AND INDUSTRIAL CHALLENGES | 2013年
关键词：
ARMORS; FIBERS; IMPACT;
D O I：
暂无
中图分类号：
TB3 [工程材料学]; R318.08 [生物材料学];
学科分类号：
0805 ; 080501 ; 080502 ;
摘要：
The objective of this work is the achievement of improved adhesive properties of woven aramid by means of atmospheric plasma treatments (APPT). The possible resistance decrease of the aramid after modification has been evaluated through tensile test. Surface chemical changes have been studied by contact angle measurements and T-peel tests (with epoxy and polyurethane adhesives) are used to evaluate the improvement in wettability.
引用
收藏
页码：655 / 664
页数：10
相关论文
共 50 条
  • [1] Effect of atmospheric plasma torch on ballistic woven aramid
    Martinez, Miguel A.
    Abenojar, Juana
    Enciso, Belen
    Velasco, Francisco J.
    TEXTILE RESEARCH JOURNAL, 2017, 87 (19) : 2358 - 2367
  • [2] Adhesive Bonding Properties between NBR and Polyamide Woven Fabric with Atmospheric Pressure Plasma Treatment
    Ryu, Sang Ryeoul
    Lee, Dong Joo
    COMPOSITES RESEARCH, 2010, 23 (06): : 32 - 38
  • [3] Glass bond adhesive strength improvement by DCSBD atmospheric-pressure plasma treatment
    Bucek, Andrej
    Brablec, Antonin
    Kovacik, Dusan
    St'ahel, Pavel
    Cernak, Mirko
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 78 : 1 - 3
  • [4] The Effect of Atmospheric-Pressure Air Plasma Discharge Power on Adhesive Properties of Aramid Fibers
    Jia, Caixia
    Chen, Ping
    Wang, Qian
    Wang, Jing
    Xiong, Xuhai
    Ma, Keming
    POLYMER COMPOSITES, 2016, 37 (02) : 620 - 626
  • [5] Improvement of Adhesive Strength of Polytetrafluoroethylene by Defluorination Treatment with Combination of Atmospheric Pressure Glow Plasma Treatment and Chemical Transport Method
    Kogoma, Masuhiro
    Takahashi, Kazuo
    Tanaka, Kunihito
    JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2011, 24 (04) : 441 - 445
  • [6] Improvement in adhesive strength of fluorinated polymer films by atmospheric pressure glow plasma
    Tanaka, K
    Inomata, T
    Kogoma, M
    THIN SOLID FILMS, 2001, 386 (02) : 217 - 221
  • [7] Effect of atmospheric pressure plasma treatment on the adhesive bonds of metal surfaces
    Kanbir, Oykum
    Tasyakan, Emel
    Cavdar, Kadir
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2023, 38 (02): : 665 - 677
  • [8] Surface treatment of aramid fiber by air dielectric barrier discharge plasma at atmospheric pressure
    Jia, Caixia
    Chen, Ping
    Liu, Wei
    Li, Bin
    Wang, Qian
    APPLIED SURFACE SCIENCE, 2011, 257 (09) : 4165 - 4170
  • [9] Atmospheric pressure plasma treatment of glassy carbon for adhesion improvement
    Kusano, Y.
    Mortensen, H.
    Stenum, B.
    Goutianos, S.
    Mitra, S.
    Ghanbari-Siahkali, A.
    Kingshott, P.
    Sorensen, B. F.
    Bindslev, H.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2007, 27 (05) : 402 - 408
  • [10] Atmospheric pressure plasma treatment of glassy carbon for adhesion improvement
    Kusano, Y.
    Mortensen, H.
    Stenum, B.
    Goutianos, S.
    Mitra, S.
    Ghanbari-Siahkali, A.
    Kingshott, P.
    Sørensen, B.F.
    Bindslev, H.
    International Journal of Adhesion and Adhesives, 2007, 27 (05): : 402 - 408
12345