Charge neutral MoS2 field effect transistors through oxygen plasma treatment

Lithographically fabricated MoS2 field effect transistors suffer from several critical imperfections, including low sub-threshold swings, large turn-on gate voltages (VT), and wide device-to-device variability. The large magnitude and variability of VT stems from unclean interfaces, trapped charges in the underlying substrate, and sulfur vacancies created during the mechanical exfoliation process. In this study, we demonstrate a simple and reliable oxygen plasma treatment, which mitigates the effects of unintentional doping created by surface defect sites, such as S vacancies, and surface contamination. This plasma treatment restores charge neutrality to the MoS2 and shifts the threshold turn-on voltage towards 0V. Out of the 10 devices measured, all exhibit a shift of the FET turn-on voltage from an average of -18V to -2V. The oxygen plasma treatment passivates these defects, which reduces surface scattering, causing increased mobility and improved subthreshold swing. For as-prepared devices with low mobilities (similar to 0.01 cm(2)/Vs), we observe up to a 190-fold increase in mobility after exposure to the oxygen plasma. Perhaps the most important aspect of this oxygen plasma treatment is that it reduces the device-to-device variability, which is a crucial factor in realizing any practical application of these devices. Published by AIP Publishing.