Electrochemical impedance spectroscopy study of high-palladium dental alloys. Part I: Behavior at open-circuit potential

Electrochemical impedance spectroscopy (EIS) was used to study the in vitro corrosion of three representative high-palladium alloys and a gold-palladium alloy for comparison. The corrosion resistances (measured as the charge transfer resistance R-CT from an equivalent circuit) of the high-palladium alloys and the gold-palladium alloy were comparable in simulated body fluid and oral environments, and under simulated dental plaque. The great similarity in corrosion behavior for the three high-palladium alloys is largely attributed to their substantial palladium content and passivity in the laboratory test media, and possibly to their similar structure at the submicron level. Differences in composition and microstructure at the micron level and greater, including the effects of heat treatment simulating the firing cycles for dental porcelain, do not have noteworthy effects on the in vitro corrosion of the three high-palladium alloys. Good accuracy and convenience of extracting corrosion characteristics from equivalent circuit modeling, along with the capability of providing intrinsic information about the corrosion mechanism, enable EIS to be an excellent alternative method to conventional potentiodynamic polarization for evaluating the corrosion behavior of noble dental alloys. (C) 202 Kluwer Academic Publishers.