Theoretical simulation of cutting edge wear when milling wood and wood based products

被引：13
|
作者：
Porankiewicz, B [1 ]
机构：
[1] August Cieszowski Agr Univ Poznan, Fac Wood Technol, PL-60637 Poznan, Poland
来源：
WOOD SCIENCE AND TECHNOLOGY | 2006年 / 40卷 / 02期
关键词：
9;
D O I：
10.1007/s00226-005-0032-y
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
Theoretical simulation of cutting edge wearing when milling wood and melamine coated particle board based on stochastical and analytical methods is presented. Abrasion, high temperature corrosion (HTC) and frictional wearing effects are discussed. Results of computations show good correlation between the observed and predicted wear rate for three different experiments. Relations between predicted tool wear rate from HTC, content (C-CP) and size (S-CP) of particles of hard mineral contamination and density (D) of cut material is also presented and discussed.
引用
收藏
页码：107 / 117
页数：11
相关论文
共 50 条
  • [1] Theoretical simulation of cutting edge wear when milling wood and wood based products
    Bolesław Porankiewicz
    Wood Science and Technology, 2006, 40 : 107 - 117
  • [2] THEORETICAL METHOD FOR PREDICTION OF THE CUTTING EDGE RECESSION DURING MILLING WOOD AND SECONDARY WOOD PRODUCTS
    Porankiewicz, Boleslaw
    BIORESOURCES, 2008, 3 (04): : 1103 - 1117
  • [3] Theoretical method for prediction of the cutting edge recession during milling wood and secondary wood products
    BioResour., 2008, 4 (1103-1117):
  • [4] Influence of Cutting Tool Wear on the Surface Roughness when Milling Wood
    Keturakis, G.
    Jakubauskaite, I.
    MECHANIKA 2009 - PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE, 2009, : 221 - 225
  • [5] Influence of Cutting Wedge Treatment on Cutting Power, Machined Surface Quality, and Cutting Edge Wear When Plane Milling Oak Wood
    Koleda, Peter
    Barcik, Stefan
    Svoren, Jan
    Nascak, Lubomir
    Dobrik, Andrej
    BIORESOURCES, 2019, 14 (04) : 9271 - 9286
  • [6] A Theoretical Model for the Increases in Cutting Edge Recessions During Milling of Nine Species of Wood
    Porankiewicz, Boleslaw
    Wieczorek, Daria
    Bocho-Janiszewska, Anita
    Klimaszewska, Emilia
    Tanaka, Chiaki
    Darmawan, Wayan
    BIORESOURCES, 2018, 13 (02): : 3892 - 3904
  • [7] Specific wear on the rake face made of sintered carbide cutting edge during milling of laminated wood
    Porankiewicz, Boleslaw
    Jozwiak, Karol
    Wieczorek, Daria
    Idzikowski, Ireneusz
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2015, 73 (01) : 35 - 41
  • [8] Specific wear on the rake face made of sintered carbide cutting edge during milling of laminated wood
    Bolesław Porankiewicz
    Karol Jóźwiak
    Daria Wieczorek
    Ireneusz Idzikowski
    European Journal of Wood and Wood Products, 2015, 73 : 35 - 41
  • [9] Cutting Conditions and Tool Wear when Machining Wood-Based Materials
    Chladil, Josef
    Sedlak, Josef
    Sebelova, Eva Rybarova
    Kucera, Marian
    Dado, Miroslav
    BIORESOURCES, 2019, 14 (02) : 3495 - 3505
  • [10] Factors influencing steel tool wear when milling wood
    Porankiewicz, B
    Sandak, J
    Tanaka, C
    WOOD SCIENCE AND TECHNOLOGY, 2005, 39 (03) : 225 - 234
12345