共 8 条
Multiparameter full waveform inversion of multicomponent ocean-bottom-cable data from the Valhall field. Part 2: imaging compressive-wave and shear-wave velocities
被引:86
|作者:
Prieux, Vincent
[1
]
Brossier, Romain
[2
]
Operto, Stephane
[1
]
Virieux, Jean
[2
]
机构:
[1] Univ Nice Sophia Antipolis, Geoazur, Observ Cote Azur, CNRS,IRD,CGG Massy, Valbonne, France
[2] Univ Grenoble 1, CNRS, ISTerre, Grenoble, France
关键词:
Inverse theory;
Elasticity and anelasticity;
Controlled source seismology;
Computational seismology;
Wave propagation;
FREQUENCY-DOMAIN;
WIDE-APERTURE;
SEISMIC DATA;
TOMOGRAPHY;
STRATEGY;
NEWTON;
NORM;
D O I:
10.1093/gji/ggt178
中图分类号:
P3 [地球物理学];
P59 [地球化学];
学科分类号:
0708 ;
070902 ;
摘要:
Multiparameter elastic full waveform inversion (FWI) is a promising technology that allows inferences to be made on rock and fluid properties, which thus narrows the gap between seismic imaging and reservoir characterization. Here, we assess the feasibility of 2-D vertical transverse isotropic visco-elastic FWI of wide-aperture multicomponent ocean-bottom-cable data from the Valhall oil field. A key issue is to design a suitable hierarchical data-driven and model-driven FWI workflow, the aim of which is to reduce the nonlinearity of the FWI. This nonlinearity partly arises because the shear (S) wavespeed can have a limited influence on seismic data in marine environments. In a preliminary stage, visco-acoustic FWI of the hydrophone component is performed to build a compressional (P)-wave velocity model, a density model and a quality-factor model, which provide the necessary background models for the subsequent elastic inversion. During the elastic FWI, the P and S wavespeeds are jointly updated in two steps. First, the hydrophone data are inverted to mainly update the long-to-intermediate wavelengths of the S wavespeeds from the amplitude-versus-offset variations of the P-P reflections. This S-wave velocity model is used as an improved starting model for the subsequent inversion of the better-resolving data recorded by the geophones. During these two steps, the P-wave velocity model is marginally updated, which supports the relevance of the visco-acoustic FWI results. Through seismic modelling, we show that the resulting visco-elastic model allows several P-to-S converted phases recorded on the horizontal-geophone component to be matched. Several elastic quantities, such as the Poisson ratio, and the ratio and product between the P and S wavespeeds, are inferred from the P-wave and S-wave velocity models. These attributes provide hints for the interpretation of an accumulation of gas below lithological barriers.
引用
收藏
页码:1665 / 1681
页数:17
相关论文