Influence of QLT treatment on microstructure and mechanical properties of a high nickel steel

被引：46
|
作者：
Wu, S. J. [1 ]
Sun, G. J. [1 ]
Ma, Q. S. [2 ]
Shen, Q. Y. [2 ]
Xu, L. [2 ]
机构：
[1] Beihang Univ, Sch Mat Sci & Engn, Beijing 100191, Peoples R China
[2] Shougang Res Inst Technol, Beijing 100043, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2013年 / 213卷 / 01期
关键词：
QLT treatment; L process; T tempering; Retained austenite; PRECIPITATED AUSTENITE; HEAT-TREATMENT; MARTENSITE; TOUGHNESS;
D O I：
10.1016/j.jmatprotec.2012.08.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
After direct quenching from 870 degrees C. the samples were subjected to secondary quenching (L) at different intercritical temperatures within the two-phase region and various tempering temperatures (T). Optical microscopy and scanning electron microscopy were employed to analyse the distributions of phases and grain sizes, and transmission electron microscopy was used to reveal the morphology of martensite and retained austenite. Charpy impact specimens of the steel after different heat treatment were tested. Results show that QLT treatment gives the best impact toughness values compared with the rolling condition and conventional quenching and tempering process, and the optimum QLT heat treatment parameters are determined as Q: 870 C, L: 770 degrees C, and T: 580 degrees C. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：120 / 128
页数：9
相关论文
共 50 条
  • [1] Influence of Microalloying and Isothermal Treatment on Microstructure and Mechanical Properties of High Carbon Steel
    Dey, Indrajit
    Saha, Rajib
    Ghosh, Swarup Kumar
    METALS AND MATERIALS INTERNATIONAL, 2022, 28 (07) : 1662 - 1677
  • [2] Influence of Microalloying and Isothermal Treatment on Microstructure and Mechanical Properties of High Carbon Steel
    Indrajit Dey
    Rajib Saha
    Swarup Kumar Ghosh
    Metals and Materials International, 2022, 28 : 1662 - 1677
  • [3] Influence of Nickel on Microstructure and Mechanical Properties in Medium-Carbon Spring Steel
    Yu, Qian
    Zhao, Yuliang
    Zhao, Feiyu
    MATERIALS, 2024, 17 (10)
  • [4] Influence of steel microstructure on their mechanical properties
    Galtier, André
    Bouaziz, Olivier
    Lambert, Astride
    2002, EDP Sciences, 17 Avenue du Hoggar - BP 112, Les Ulis Cedex A, F-91944, France (03):
  • [5] Welding of nickel free high nitrogen stainless steel: Microstructure and mechanical properties
    Mohammed, Raffi
    Reddy, G. Madhusudhan
    Rao, K. Srinivasa
    DEFENCE TECHNOLOGY, 2017, 13 (02): : 59 - 71
  • [6] Influence of Austempering Heat Treatment on Microstructure and Mechanical Properties of Medium Carbon High Silicon Steel
    Palaksha, P. A.
    Ravishankar, K. S.
    INTERNATIONAL CONFERENCE ON MATERIALS, ALLOYS AND EXPERIMENTAL MECHANICS (ICMAEM-2017), 2017, 225
  • [7] Welding of nickel free high nitrogen stainless steel: Microstructure and mechanical properties
    Raffi Mohammed
    G.Madhusudhan Reddy
    K.Srinivasa Rao
    Defence Technology, 2017, (02) : 59 - 71
  • [8] The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel
    M. Jahazi
    Metals and Materials, 1998, 4 : 818 - 822
  • [9] The influence of thermomechanical treatment on the microstructure and mechanical properties of AISI 4130 steel
    Jahazi, M
    METALS AND MATERIALS INTERNATIONAL, 1998, 4 (04) : 818 - 822
  • [10] Microstructure and mechanical properties of low nickel maraging steel
    Sha, W.
    Ye, A.
    Malinov, S.
    Wilson, E. A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 536 : 129 - 135
12345