Multiscale study of morphology of the fracture surface aluminum-magnesium alloy with consecutive dynamic and gigacycle loading

In this paper we investigated the influence of consecutive dynamic and gigacycle fatigue loads on the lifetime of aluminum magnesium alloy AlMg6. Preloading of samples was achieved during dynamic tensile tests in the split-Hopkinson bar device and quasi-static loadings were carried out on a servo hydraulic tensile machine (Biss Bi-00-100 series). Fatigue tests were conducted on Shimadzu USF-2000 ultrasonic fatigue testing machine. This machine provides 10(9)-10(10) loading cycles with the amplitude from 1 to several dozens of microns and frequency of 20 kHz, which reduces dramatically the testing time in the comparison to the classical fatigue testing machines. The New-View 5010 interferometer profiler of high structural resolution (resolution of 0.1 nm) was used for qualitative fracture surface analysis, which provided the data allowing us to find correlation between mechanical properties and scale-invariant characteristics of damage induced roughness formed under dynamic and gigacycle fatigue loading conditions. Original form of the kinetic equation was proposed, which links the rate of the fatigue crack growth and the stress intensity factor using the scale invariant parameters of fracture surface roughness. The scale invariance characterizes the correlated behavior of multiscale damage provides the link of crack growth kinetics and the power exponent of the modified Paris law. Copyright (C) 2016 The Authors. Published by Elsevier B.V.