RELIABILITY ASSESSMENT OF CREEP RUPTURE LIFE FOR GR.91 STEEL BY AN INTERFERENCE MODEL

被引:0
|
作者
Woo-Gon, Kim [1 ]
Jae-Young, Park
Song-Nan, Yin [1 ]
Dae-Whan, Kim [1 ]
Ji-Yeon, Park [1 ]
Seon-Jin, Kim
机构
[1] Korea Atom Energy Res Inst, Taejon 305353, South Korea
关键词
THETA-PROJECTION CONCEPT; HASTELLOY-X ALLOY; EXPONENTIAL DESCRIPTIONS; OMEGA-METHOD; PREDICTION; CURVES; STRAIN;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper focuses on reliability assessment of creep rupture life under the service conditions at high temperatures and stresses for Gr. 91 steel which is considered as one of the prime structural materials for next-generation nuclear reactors. An interference model based on Z parameter, which is considered for the fluctuations of both service temperature and stress besides the scattering of rupture data, was analyzed and used to assess the reliability on creep rupture life of Gr. 91 steel. The scattering distribution of the creep rupture data of the Gr. 91 steel was investigated by using the Z parameter. It appeared that the Z parameter of creep rupture data for Gr.91 steel exhibited normal distribution. Using the normal distribution, a Monte-Carlo simulation (MCS) was carried out to generate a number of random variables for Z(s) and Z(cr), and the reliability of the creep rupture life under the fluctuations of service temperature and stress conditions was estimated by using the interference model. It showed that the value of reliability decreased with increasing service time. Higher temperature caused the trend of faster deterioration. The value of reliability decreased rapidly at higher temperature fluctuation amplitude, and the reliability decreased as the scattering of the creep rupture data became serious.
引用
收藏
页码:785 / 791
页数:7
相关论文
共 50 条
  • [1] Reliability assessment of creep rupture life for Gr. 91 steel
    Kim, Woo-Gon
    Park, Jae-Young
    Kim, Seon-Jin
    Jang, Jinsung
    MATERIALS & DESIGN, 2013, 51 : 1045 - 1051
  • [2] CREEP DEFORMATION PARAMETERS AND CREEP LIFE OF GR.91
    Abe, Fujio
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6A: MATERIALS AND FABRICATION, 2014,
  • [3] Creep modeling and creep life estimation of Gr.91
    Abe, Fujio
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (06) : 765 - 773
  • [4] Creep damage assessment of Gr.91 steel welds by UPA method
    Shioda Y.
    Saito N.
    Tanoue T.
    Nomura K.
    Kubushiro K.
    Zairyo/Journal of the Society of Materials Science, Japan, 2021, 70 (02) : 177 - 183
  • [5] EVALUATION OF LONG-TERM CREEP RUPTURE LIFE OF GR.91 STEEL BY ANALYSIS OF ON-GOING CREEP CURVES
    Maruyama, Kouichi
    Nakamura, Junya
    Yoshimi, Kyosuke
    Nagae, Yuji
    ADVANCES IN MATERIALS TECHNOLOGY FOR FOSSIL POWER PLANTS: PROCEEDINGS FROM THE EIGHTH INTERNATIONAL CONFERENCE, 2016, 2016, : 466 - 477
  • [6] Creep life estimation of Gr.91 based on creep strain analysis
    Abe, Fujio
    MATERIALS AT HIGH TEMPERATURES, 2011, 28 (02) : 75 - 84
  • [7] Creep-Fatigue Life Estimation of Gr.91 Steel and Its Welded Joints
    Nonaka, Isamu
    METALS, 2023, 13 (11)
  • [8] Effect of creep deformation on Z phase formation in Gr.91 steel
    Sawada, K.
    Kushima, H.
    Tabuchi, M.
    Kimura, K.
    MATERIALS SCIENCE AND TECHNOLOGY, 2014, 30 (01) : 12 - 16
  • [9] CREEP LIFE PREDICTION OF GR.91 USING CREEP PARAMETERS IN TRANSIENT REGION
    Abe, Fujio
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2012, VOL 6, PTS A AND B, 2012, : 271 - 280
  • [10] Creep rupture ductility of Gr.91 and Gr.92 at 550°C to 700°C
    Abe, Fujio
    MATERIALS AT HIGH TEMPERATURES, 2020, 37 (04) : 243 - 255