Preparation and Some Properties of Sintered Aluminosilicate Ceramic Based on HCBS. Part II

被引：1

作者：

Pivinskii, Yu. E. ^{[1
]}

Dyakin, P. V. ^{[2
]}

Gorbachev, D. V. ^{[3
]}

Strel'tsov, S. A. ^{[3
]}

机构：

[1] OOO NVF Kerambet Ogneupor, St Petersburg, Russia

[2] Tech Univ, GOU VPO St Petersburg State Technol Inst, St Petersburg, Russia

[3] OOO VKVS Tekhnol, Lipetsk, Russia

来源：

REFRACTORIES AND INDUSTRIAL CERAMICS | 2013年 / 54卷 / 02期

关键词：

HCBS; casting; sintering; porosity; shrinkage; strength; thermal expansion; fine ceramics; artistic architectural ceramics;

D O I：

10.1007/s11148-013-9561-3

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Sintering and some properties of fine aluminosilicate ceramic, prepared on the basis of HCBS from broken porcelain electric insulator and pearlite, are studied. After firing at 1000 - 1500A degrees C ceramic has open porosity of 1 - 8%, and ultimate strength in bending and compression of 45 - 65 and 350 - 500 MPa respectively. Compared with traditional fine ceramic materials, such as porcelain, semi-porcelain, hard faience, and majolica, in the new technology comparable properties are achieved with significantly (by a factor of 3 - 5) lower overall shrinkage and a reduced (by 150 - 200A degrees C) firing temperature. Possible areas are indicated for implementingHCBS-technology in the field of production, not only for traditional fine ceramic, but also fine-grained structural, and artistic architectural ceramics.

引用

页码：120 / 128

页数：9

共 50 条

[1] Preparation and some properties of sintered aluminosilicate ceramic based on HCBS. Part i
Pivinskii Yu.E.
Dyakin P.V.
Gorbachev D.V.
Strel'Tsov S.A.
Refractories and Industrial Ceramics, 2013, 54 (1) : 54 - 63
[2] PREPARATION AND SOME PROPERTIES OF SINTERED ALUMINOSILICATE CERAMIC BASED ON HCBS. PART I
Pivinskii, Yu E.
Dyakin, P. V.
Gorbachev, D. V.
Strel'tsov, S. A.
REFRACTORIES AND INDUSTRIAL CERAMICS, 2013, 54 (01) : 54 - 63
[3] Preparation and Some Properties of Sintered Aluminosilicate Ceramic Based on HCBS. Part II1
Yu. E. Pivinskii
P. V. Dyakin
D. V. Gorbachev
S. A. Strel’tsov
Refractories and Industrial Ceramics, 2013, 54 : 120 - 128
[4] ALUMINOSILICATE REFRACTORIES BASED ON HIGH-ALUMINA HCBS. Part 2. Refractories Based on Mullite-Silica Composition HCBS
Pivinskii, Yu. E.
Dyakin, Pavel V.
REFRACTORIES AND INDUSTRIAL CERAMICS, 2011, 52 (04) : 264 - 271
[5] ALUMINOSILICATE REFRACTORIES BASED ON HIGH-ALUMINA HCBS. PART 1. REFRACTORIES BASED ON MIXED HCBS IN THE SYSTEM BAUXITE - SILICA
Pivinskii, Yu. E.
Dyakin, Pavel V.
REFRACTORIES AND INDUSTRIAL CERAMICS, 2011, 51 (05) : 358 - 365
[6] Aluminosilicate refractories based on high-alumina HCBS. Part 1. Refractories based on mixed HCBS in the system bauxite — silica
Yu. E. Pivinskii
Pavel V. Dyakin
Refractories and Industrial Ceramics, 2011, 51 : 358 - 365
[7] Materials based on highly concentrated ceramic binding suspensions (HCBS). On preparation and some properties of silica refractory mixtures based on quartzite HCBS
Pivinskii, YE
Cherevatova, AV
Bosak, YN
REFRACTORIES AND INDUSTRIAL CERAMICS, 1999, 40 (7-8) : 296 - 300
[8] Materials based on highly concentrated ceramic binding suspensions (HCBS). On preparation and some properties of silica refractory mixtures based on quartzite HCBS
Yu. E. Pivinskii
A. V. Cherevatova
Yu. N. Bosak
Refractories and Industrial Ceramics, 1999, 40 : 296 - 300
[9] PREPARATION AND PROPERTIES OF CORUNDUM HCBS AND CERAMIC CONCRETES. PART 2. COMPOSITION AND PROPERTIES OF COMPACTED CERAMIC CONCRETES
Pivinskii, Yu. E.
Dyakin, Pavel V.
REFRACTORIES AND INDUSTRIAL CERAMICS, 2010, 51 (01) : 32 - 38
[10] Preparation and properties of corundum HCBS and ceramic concretes. Part 2. Composition and properties of compacted ceramic concretes
Yu. E. Pivinskii
Pavel V. Dyakin
Refractories and Industrial Ceramics, 2010, 51 : 32 - 38

← 1 2 3 4 5 →