Microstructure and Hardness Change in High Temperature Service Depending on Mo Content in 2.25Cr-1Mo Steel Weld Metals

被引：9

作者：

Kang, D. H. ^{[1
]}

Lee, H. W. ^{[1
]}

机构：

[1] Dong A Univ, Dept Mat Sci & Engn, Pusan 604714, South Korea

来源：

METALS AND MATERIALS INTERNATIONAL | 2011年 / 17卷 / 06期

关键词：

metals; welding; aging; microstructure; mechanical properties; MECHANICAL-PROPERTIES; BAINITE; HOT; AUSTENITE; CORROSION; WELDMENTS; LIFE;

D O I：

10.1007/s12540-011-6015-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructural characteristics and properties of 2.25Cr-1Mo weld metal were investigated at high temperatures by modifying the Mo content of commercial filler wires using the flux cored arc welding (FCAW) process. The microstructure of the as-welded specimens was composed of fine bainite and acicular ferrite, and the hardness and strength increased with increasing Mo content. Each weld metal was heat-treated at 400 degrees C, 500 degrees C, 600 degrees C and 700 degrees C for 24 h. The microstructure exhibited a tempered bainite structure after the heat treatment at 400 degrees C and 500 degrees C, whereas the bainite was slightly coarsened at 600 degrees C. Bulky ferrite with carbides that had transformed from the bainite dissolution was observed at 700 degrees C, and the hardness significantly decreased.

引用

页码：963 / 967

页数：5

共 50 条

[1] Microstructure and hardness change in high temperature service depending on Mo content in 2.25Cr-1Mo steel weld metals
D. H. Kang
H. W. Lee
Metals and Materials International, 2011, 17 : 963 - 967
[2] Effect of thermal ageing on the evolution of microstructure and degradation of hardness of 2.25Cr-1Mo steel
Jha, B. B.
Mishra, B. K.
Satpati, B.
Ojha, S. N.
MATERIALS SCIENCE-POLAND, 2010, 28 (01): : 335 - 346
[3] EFFECT OF TEMPERATURE ON THE MICROSTRUCTURE OF 2.25CR-1MO STEEL DURING CREEP TESTING
AHILA, S
RADHAKRISHNAN, VM
IYER, SR
JOURNAL OF MATERIALS SCIENCE LETTERS, 1993, 12 (16) : 1296 - 1298
[4] Evolution of microstructure and toughness in 2.25Cr-1Mo steel welds
Elrefaey, Ahmed
Javadi, Yashar
Francis, John A.
Callaghan, Mark D.
Leonard, Andrew J.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2018, 165 : 20 - 28
[5] Evolution and Coarsening of Carbides in 2.25Cr-1Mo Steel Weld Metal During High Temperature Tempering
Takeda Hiroyuki
JournalofIronandSteelResearch(International), 2010, 17 (05) : 74 - 78
[6] Simulated weld HAZ of vanadium modified 2.25Cr-1Mo steel
Shinya, T
Tomita, Y
ZEITSCHRIFT FUR METALLKUNDE, 1997, 88 (10): : 800 - 803
[7] Phosphorus segregation in 2.25Cr-1Mo steel
Ding, RG
Rong, TS
Knott, JF
MATERIALS SCIENCE AND TECHNOLOGY, 2005, 21 (01) : 85 - 92
[8] HIGH-TEMPERATURE STABILITY OF 2.25CR-1MO STEEL DURING CREEP
AHILA, S
IYER, SR
RADHAKRISHNAN, VM
MATERIALS AT HIGH TEMPERATURES, 1994, 12 (01) : 5 - 11
[9] SCALE GROWTH ON 2.25CR-1MO STEEL
SIMMS, NJ
LITTLE, JA
MATERIALS SCIENCE AND TECHNOLOGY, 1988, 4 (12) : 1133 - 1139
[10] THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF A MODIFIED 2.25CR-1MO STEEL
KLUEH, RL
SWINDEMAN, RW
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (06): : 1027 - 1034

← 1 2 3 4 5 →