Interleaved non-isolated high step-up DC/DC converter based on the diode-capacitor multiplier

A kind of interleaved non-isolated high step-up DC/DC converter is presented in this study. The converter consists of two basic Boost cells and some diode-capacitor multiplier (DCM) cells as needed. Because of the DCM cells, the voltage conversion ratio is enlarged and the extreme large duty ratio can be avoided in the high step-up applications. Moreover, the voltage stress of all the power devices is greatly lower than the output voltage. As a result, lower-voltage-rated power devices can be employed, and higher efficiency can be expected. Since the two basic Boost cells are controlled by the interleaving method, which means the phase difference between the two pulse width moderlation (PWM) signals is 180 degrees and the input current is the sums of the two inductor currents, the input current ripple is decreased and the size of the input filter could be reduced, which make it a suitable choice in the photovoltaic power generation system and hybrid electric vehicles, etc. Finally, the experimental results from a 300 W, 30-400 V laboratory prototype are presented to validate the effectiveness of the proposed converter.