Investigation of surface morphology and ion activation of aluminium implanted 4H-SiC

被引：6

作者：

Song QingWen ^{[1
]}

Zhang YuMing ^{[1
]}

Zhang YiMen ^{[1
]}

Tang XiaoYan ^{[1
]}

机构：

[1] Xidian Univ, Sch Microelect, Key Lab Wide Band Gap Semicond Mat & Devices, Xian 710071, Peoples R China

来源：

SCIENCE CHINA-TECHNOLOGICAL SCIENCES | 2012年 / 55卷 / 12期

基金：

中国国家自然科学基金;

关键词：

4H-SiC; Al+ implantation; activation anneal; surface morphology;

D O I：

10.1007/s11431-012-4827-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Multiple-energy aluminium (Al+) implantation into 4H-SiC (0001) epilayer and activation anneal with a graphite encapsulation layer were investigated in this paper. Measurements showed that the implanted Al box doping profile was formed and a high ion activation ratio of 78% was achieved by 40 min annealing at 1600 degrees C using a horizontal chemical vapor deposition (CVD) reactor. The step bunching effect associated with the high temperature post implantation activation annealing (PIA) process was dramatically suppressed by using the graphite encapsulation layer. And a flat and smooth surface with a small average surface roughness (RMS) value of around 1.16 nm was achieved for the implanted 4H-SiC after the PIA process. It was demonstrated that this surface protection technique is a quite effective process for 4H-SiC power devices fabrication.

引用

页码：3401 / 3404

页数：4

共 50 条

[1] Investigation of surface morphology and ion activation of aluminium implanted 4H-SiC
SONG QingWen *
Science China(Technological Sciences), 2012, (12) : 3401 - 3404
[2] Investigation of surface morphology and ion activation of aluminium implanted 4H-SiC
SONG QingWen ZHANG YuMing ZHANG YiMen TANG XiaoYan Key Laboratory of Wide BandGap Semiconductor Materials and Devices School of Microelectronics Xidian University Xian China
Science China(Technological Sciences), 2012, 55 (12) : 3401 - 3404
[3] Investigation of surface morphology and ion activation of aluminium implanted 4H-SiC
QingWen Song
YuMing Zhang
YiMen Zhang
XiaoYan Tang
Science China Technological Sciences, 2012, 55 : 3401 - 3404
[4] Electrical characteristics and surface morphology for arsenic ion-implanted 4H-SiC at high temperature
Senzaki, Junji
Fukuda, Kenji
Imai, Seiji
Tanaka, Yasunori
Kobayashi, Naoto
Tanoue, Hisao
Okushi, Hideyo
Arai, Kazuo
Materials Science Forum, 2000, 338
[5] Electrical characteristics and surface morphology for arsenic ion-implanted 4H-SiC at high temperature
Senzaki, J
Fukuda, K
Imai, S
Tanaka, Y
Kobayashi, N
Tanoue, H
Okushi, H
Arai, K
SILICON CARBIDE AND RELATED MATERIALS - 1999 PTS, 1 & 2, 2000, 338-3 : 865 - 868
[6] Microwave Annealing of Ion Implanted 4H-SiC
Rao, Mulpuri V.
Nath, A.
Qadri, S. B.
Tian, Y-L.
Nipoti, R.
ION IMPLANTATION TECHNOLOGY 2010, 2010, 1321 : 241 - +
[7] Investigation of the 4H-SiC surface
Guy, O. J.
Lodzinski, M.
Teng, K. S.
Maffeis, T. G. G.
Tan, M.
Blackwood, I.
Dunstan, P. R.
Al-Hartomy, O.
Wilks, S. P.
Wilby, T.
Rimmer, N.
Lewis, D.
Hopkins, J.
APPLIED SURFACE SCIENCE, 2008, 254 (24) : 8098 - 8105
[8] Investigation of structural stability in 4H-SiC structures with heavy ion implanted interface
Galeckas, A.
Hallen, A.
Schoner, A.
Linnros, J.
Pirouz, P.
Silicon Carbide and Related Materials 2005, Pts 1 and 2, 2006, 527-529 : 395 - 398
[9] Activation of aluminum implanted at high doses in 4H-SiC
1971, American Inst of Physics, Woodbury, NY, USA (88):
[10] Base impurity surface density dependency of Ion Implanted 4H-SiC BJT
Tajima, Taku
Watabe, Yuki
Takenaka, Kazumasa
Satoh, Masataka
Nakamura, Tohru
REPORT OF RESEARCH CENTER OF ION BEAM TECHNOLOGY, HOSEI UNIVERSITY, 2009, (27): : 105 - 107

← 1 2 3 4 5 →