Diode Laser Assisted Surface Nitriding of Ti-6Al-4V: Properties of the Nitrided Surface

被引：22
|
作者：
Biswas, Amit [1 ]
Li, Lin [2 ]
Chatterjee, U. K. [1 ]
Manna, I. [1 ]
Majumdar, Jyotsna Dutta [1 ]
机构：
[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
[2] Univ Manchester, Sch Mech Aerosp & Civil Engn, Manchester M60 1QD, Lancs, England
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2009年 / 40A卷 / 12期
关键词：
COATED TI-6AL-4V; TITANIUM; DIFFERENTIATION; FIBRONECTIN;
D O I：
10.1007/s11661-009-0021-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, a detailed investigation of mechanical and electrochemical properties of laser-surface-nitrided Ti-6Al-4V has been carried out. Laser treatment is carried out by melting the surface of Ti-6Al-4V substrate using a high power CW diode laser with nitrogen as shrouding environment. The effect of laser parameters (applied power and gas flow rate) on the properties of the nitrided surface was evaluated. The microhardness of the nitrided surface was improved to a maximum of 1175 VHN in the present set of laser processing conditions as compared to 280 VHN of as-received substrate. Surface nitriding increased the potential for pit formation (E-pit) significantly as compared to as-received Ti-6Al-4V. Immersion in Hank's solution showed calcium phosphate deposition from the solution. The optimum process parameters for laser surface nitriding were derived.
引用
收藏
页码：3031 / 3037
页数：7
相关论文
共 50 条
  • [1] Diode Laser Assisted Surface Nitriding of Ti-6Al-4V: Properties of the Nitrided Surface
    Amit Biswas
    Lin Li
    U.K. Chatterjee
    I. Manna
    Jyotsna Dutta Majumdar
    Metallurgical and Materials Transactions A, 2009, 40 : 3031 - 3037
  • [2] Mechanical and electrochemical properties of laser surface nitrided Ti-6Al-4V
    Biswas, A.
    Li, L.
    Chatterjee, U. K.
    Manna, I.
    Pabi, S. K.
    Majumdar, J. Dutta
    SCRIPTA MATERIALIA, 2008, 59 (02) : 239 - 242
  • [3] Laser surface nitriding of Ti-6Al-4V titanium alloy
    Masse, JE
    Mathieu, JF
    MATERIALS AND MANUFACTURING PROCESSES, 1996, 11 (02) : 207 - 214
  • [4] Laser surface nitriding of Ti-6Al-4V titanium alloy
    ENSAM, Aix-en-Provence, France
    Mater Manuf Process, 2 (207-214):
  • [5] Surface morphology of a laser surface nitrided and etched Ti-6Al-4V alloy
    Man, HC
    Zhao, NQ
    Cui, ZD
    SURFACE & COATINGS TECHNOLOGY, 2005, 192 (2-3): : 341 - 346
  • [6] Creep behavior and surface characterization of a laser surface nitrided Ti-6Al-4V alloy
    dos Reis, Adriano Goncalves
    Pereira Reis, Danieli Aparecida
    de Moura Neto, Carlos
    Ribeiro Barboza, Miguel Justino
    Onoro, Javier
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 577 : 48 - 53
  • [7] Laser assisted nitriding of Ti-6Al-4V alloy: Metallurgical and electrochemical properties
    Yilbas, BS
    Khalid, M
    Shuja, SZ
    CHEMICAL ENGINEERING & TECHNOLOGY, 1999, 22 (10) : 871 - 876
  • [8] An integrated experimental and computational approach to laser surface nitriding of Ti-6Al-4V
    Dahotre, Sanket N.
    Vora, Hitesh D.
    Pavani, K.
    Banerjee, Rajarshi
    APPLIED SURFACE SCIENCE, 2013, 271 : 141 - 148
  • [9] Laser surface nitriding of Ti-6Al-4V for bio-implant application
    Biswas, Amit
    Maity, T.K.
    Chatterjee, U.K.
    Manna, I.
    Li, Lin
    Dutta Majumdar, J.
    Trends in Biomaterials and Artificial Organs, 2006, 20 (01): : 68 - 71
  • [10] Laser surface texturing on Ti-6Al-4V
    Shivakoti, Ishwer
    Kibria, Golam
    Das, Soham
    Sharma, Ashis
    Pradhan, Bal Bahadur
    Chatterjee, Somenath
    MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (07) : 858 - 867
12345