Copper Nanoparticle/Multiwalled Carbon Nanotube Composite Films with High Electrical Conductivity and Fatigue Resistance Fabricated via Flash Light Sintering

被引：68
|
作者：
Hwang, Hyun-Jun [1 ]
Joo, Sung-Jun [1 ]
Kim, Hak-Sung [1 ,2 ]
机构：
[1] Hanyang Univ, Dept Mech Engn, Seoul 133791, South Korea
[2] Hanyang Univ, Inst Nano Sci & Technol, Seoul 133791, South Korea
来源：
ACS APPLIED MATERIALS & INTERFACES | 2015年 / 7卷 / 45期
基金：
新加坡国家研究基金会;
关键词：
printed electronics; Cu nanoparticle; multiwalled carbon nanotube; flash light; sintering; INTENSE PULSED-LIGHT; THIN-FILMS; PERFORMANCE; PATTERN; ELECTRODES; DUCTILITY;
D O I：
10.1021/acsami.5b08112
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this work, multiwalled carbon nanotubes (MWNTs) were employed to improve the conductivity and fatigue resistance of flash light sintered copper nanoparticle (NP) ink films. The effect of CNT weight fraction on the flash light sintering and the fatigue characteristics of Cu NP/CNT composite films were investigated. The effect of carbon nanotube length was also studied with regard to enhancing the conductivity and fatigue resistance of flash light sintered Cu NP/CNT composite films. The flash light irradiation energy was optimized to obtain high conductivity Cu NP/CNT composite films. Cu NP/CNT composite films fabricated via optimized flash light irradiation had the lowest resistivity (7.86 mu Omega center dot cm), which was only 4.6 times higher than that of bulk Cu films (1.68 mu Omega center dot cm). It was also demonstrated that Cu NP/CNT composite films had better durability and environmental stability than those of Cu NPs only.
引用
收藏
页码：25413 / 25423
页数：11
相关论文
共 50 条
  • [1] Electrical conductivity and electromagnetic interference shielding characteristics of multiwalled carbon nanotube filled polyacrylate composite films
    Li, Yong
    Chen, Changxin
    Zhang, Song
    Ni, Yuwei
    Huang, Jie
    APPLIED SURFACE SCIENCE, 2008, 254 (18) : 5766 - 5771
  • [2] Fabricating and strengthening the carbon nanotube/copper composite fibers with high strength and high electrical conductivity
    Han, Baoshuai
    Guo, Enyu
    Xue, Xiang
    Zhao, Zhiyong
    Li, Tiejun
    Xu, Yanjin
    Luo, Liangshun
    Hou, Hongliang
    APPLIED SURFACE SCIENCE, 2018, 441 : 984 - 992
  • [3] Fabrication of High Specific Electrical Conductivity and High Ampacity Carbon Nanotube/Copper Composite Wires
    Bazbouz, Mohamed B.
    Aziz, Atif
    Copic, Davor
    De Volder, Michael
    Welland, Mark E.
    ADVANCED ELECTRONIC MATERIALS, 2021, 7 (04)
  • [4] Field emission properties of cobalt/multiwalled carbon nanotube composite films fabricated by electrodeposition
    Arai, Susumu
    Miyagawa, Kazuaki
    APPLIED SURFACE SCIENCE, 2013, 280 : 957 - 961
  • [5] Cu/Multiwalled Carbon Nanotube Composite Films Fabricated by Pulse-Reverse Electrodeposition
    Arai, Susumu
    Suwa, Yoriyuki
    Endo, Morinobu
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2011, 158 (02) : D49 - D53
  • [6] Flash light sintered copper precursor/nanoparticle pattern with high electrical conductivity and low porosity for printed
    Chung, Wan-Ho
    Hwang, Hyun-Jun
    Kim, Hak-Sung
    THIN SOLID FILMS, 2015, 580 : 61 - 70
  • [7] Enhancement of Electrical Conductivity of Copper/Carbon-Nanotube Composite Wire
    Banno, Nobuya
    Takeuchi, Takao
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2009, 73 (09) : 651 - 658
  • [8] Tunable Conductivity of Germanium Thin Films Fabricated via Doped Colloidal Nanoparticle Sintering
    McLeod, Meghan
    Tabor, Christopher
    JOURNAL OF PHYSICAL CHEMISTRY C, 2019, 123 (02): : 1477 - 1482
  • [9] A Highly Reliable Copper Nanowire/Nanoparticle Ink Pattern with High Conductivity on Flexible Substrate Prepared via a Flash Light-Sintering Technique
    Joo, Sung-Jun
    Park, Sung-Hyeon
    Moon, Chang-Jin
    Kim, Hak-Sung
    ACS APPLIED MATERIALS & INTERFACES, 2015, 7 (10) : 5674 - 5684
  • [10] Influence of carbon nanotube clustering on the electrical conductivity of polymer composite films
    Aguilar, J. O.
    Bautista-Quijano, J. R.
    Aviles, F.
    EXPRESS POLYMER LETTERS, 2010, 4 (05): : 292 - 299
12345