Photorenewable Azobenzene Polymer Brush-Modified Nanoadsorbent for Selective Adsorption of LDL in Serum

The elevated concentration of low-density lipoprotein (LDL) is recognized as a leading factor of hyperlipidemia (HLP), and selective adsorption of serum LDL is regarded as a practical therapy. Based on the superior structure-function characteristics of stimuli-responsive materials, a photorenewable nano adsorbent (SiO2@AzogGly) with high selectivity and reusability was developed using azobenzene as the functional ligand. Its principle was certified by the preparation of silicon nanopartides with atom transfer radical polymerization (ATRP)-initiating groups via a sol-gel reaction and their subsequent grafting of azobenzene polymer brushes by surface-initiated ATRP, followed by modification with glycine. Immobilization of carboxylated azobenzene polymer brushes onto the nanoparticles endowed SiO2@Azo@Gly with high adsorption selectivity and reusability. The advanced nanoadsorbent exhibited excellent LDL adsorption capacity at about 27 mg/g and could be regenerated by illumination with high efficiency (circulations >= 5); this was further verified by transmission electron microscopy (TEM) and Fourier-transform infrared (FTIR) analysis. SiO2@Azo@Gly also demonstrated superior adsorption efficiency and selectivity in serum from HLP patients, the respective adsorption capacities of LDL, triglyceride, and total cholesterol were about 15.65, 24.48, and 28.36 mg/g, and the adsorption to high-density lipoprotein (cardioprotective effect) was only about 3.66 mg/g. Green regeneration of the nanoadsorbent could be achieved completely through a simple photoregeneration process, and the recovery rate was still 97.9% after five regeneration experiments.