Tensile moduli of co-continuous polymer blends

被引：94

作者：

Willemse, RC ^{[1
]}

Speijer, A ^{[1
]}

Langeraar, AE ^{[1
]}

de Boer, AP ^{[1
]}

机构：

[1] Delft Univ Polymer Technol, Dept Polymer Technol, NL-2628 BL Delft, Netherlands

来源：

POLYMER | 1999年 / 40卷 / 24期

关键词：

co-continuous morphology; mechanical properties; tensile modulus;

D O I：

10.1016/S0032-3861(98)00874-X

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Co-continuous blends of polyethylene with polypropylene or polystyrene are shown to exhibit high tensile moduli. The experimental results exceed predictions of the moduli using existing models for co-continuous morphologies, and approach the level of the parallel model. These high moduli are found to be isotropic to a good degree, in contrast to fibrillar polymer blends which can have such high moduli only in one direction. (C) 1999 Published by Elsevier Science Ltd. All rights reserved.

引用

页码：6645 / 6650

页数：6

共 50 条

[1] Co-continuous morphologies in polymer blends:stability
Willemse, RC
POLYMER, 1999, 40 (08) : 2175 - 2178
[2] Linear viscoelasticity of polymer blends with co-continuous morphology
Yu, Wei
Zhou, Wei
Zhou, Chixing
POLYMER, 2010, 51 (09) : 2091 - 2098
[3] Co-continuous morphologies in polymer blends: a new model
Willemse, RC
de Boer, AP
van Dam, J
Gotsis, AD
POLYMER, 1998, 39 (24) : 5879 - 5887
[4] Processing and mechanical properties of co-continuous polymer blends
Veenstra, H
van Dam, J
de Boer, AP
ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, : 2845 - 2848
[5] Co-continuous morphologies in polymer blends with SEBS block copolymers
Veenstra, H
van Lent, BJJ
van Dam, J
de Boer, AP
POLYMER, 1999, 40 (24) : 6661 - 6672
[6] On the mechanical properties of co-continuous polymer blends: experimental and modelling
Veenstra, H
Verkooijen, PCJ
van Lent, BJJ
van Dam, J
de Boer, AP
Nijhof, APHJ
POLYMER, 2000, 41 (05) : 1817 - 1826
[7] Co-continuous morphologies in polymer blends: the influence of the interfacial tension
Willemse, RC
de Boer, AP
van Dam, J
Gotsis, AD
POLYMER, 1999, 40 (04) : 827 - 834
[8] FORMATION AND CHARACTERIZATION OF CO-CONTINUOUS SHEAR THICKENING FLUID/POLYMER BLENDS
Hong, Yifeng
Yao, Donggang
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2A, 2014,
[9] Geometrical Confining Effects in Compression Molding of Co-continuous Polymer Blends
Wei Zhang
Sarang Deodhar
Donggang Yao
Annals of Biomedical Engineering, 2010, 38 : 1954 - 1964
[10] Morphology Stabilization of Co-Continuous Polymer Blends Through Clay Nanoparticles
Altobelli, Rosaria
de Luna, Martina Salzano
Causa, Andrea
Acierno, Domenico
Filippone, Giovanni
VIII INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY, 2016, 1736

← 1 2 3 4 5 →