Biochar and bio-oil fuel properties from nickel nanoparticles assisted pyrolysis of cassava peel

被引:44
|
作者
Egbosiuba, Titus Chinedu [1 ]
机构
[1] Chukwuemeka Odumegwu Ojukwu Univ, Chem Engn Dept, Uli Campus, Uli, Anambra State, Nigeria
关键词
Biomass; Biochar; Bio-oil; Biogas; Dried cassava peels; Slow pyrolysis; Nickel nanoparticles; KINETICS; TEMPERATURE; ADSORPTION; SURFACE; PARAMETERS; RESIDUE; BATCH;
D O I
10.1016/j.heliyon.2022.e10114
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
Direct biomass usage as a renewable fuel source and substitute for fossil fuels is discouraging due to high moisture, low energy density and low bulk density. Herein, thermogravimetric analysis (TGA) was conducted at various heating rates to determine peak decomposition temperatures for the dried cassava peels (DCP). The influence of pyrolysis temperature (300, 400, 500 and 600 degrees C) and heating rates (10, 20 and 30 degrees C/min) on the nickel nanoparticles catalyzed decomposition of DCP to produce biochar, bio-oil and biogas was investigated and characterized. The results revealed higher biochar (CBC) yield of 68.59 wt%, 62.55 wt% and 56.92 wt% at lower pyrolysis temperature of 300 degrees C for the different heating rates of 10, 20 and 30 degrees C/min. The higher carbon content of 52.39, 53.30 and 55.44 wt% was obtained at elevated temperature of 600 degrees C and heating rates of 10, 20 and 30 degrees C/min, respectively. At the pyrolysis temperature of 600 degrees C and heating rates of 10, 20 and 30 degrees C/min, the optimum yield of bio-oil (24.35, 17.69 and 18.16 wt%) and biogas (31.35, 42.03 and 46.12 wt%) were attained. A high heating value (HHV) of 28.70 MJ/kg was obtained for the biochar at 600 degrees C. Through the TGA, FTIR and HRSEM results, the thermal stability, hydrophobicity and structural changes of DCP and CBC samples were established. Similarly, the thermal stability of CBC samples increased with increasing pyrolysis temperature. Biochar with optimum fuel properties was produced at 600 degrees C due to the highest carbon content and high heating value (HHV). Improved kinematic viscosity (3.87 mm(2)/s) and density (0.850 g/cm(3)) were reported at the temperature of 300 degrees C and heating rate of 30 degrees C/min, while a higher pH (4.96), HHV (42.68 MJ/kg) and flash point (53.85 min) were presented by the bio-oil at the temperature of 600 degrees C and heating rate of 30 degrees C/min. Hence, DCP produced value-added biochar and bio-oil as renewable energy.
引用
收藏
页数:13
相关论文
共 50 条
  • [1] Microwave-assisted catalytic pyrolysis of switchgrass for improving bio-oil and biochar properties
    Mohamed, Badr A.
    Kim, Chang Soo
    Ellis, Naoko
    Bi, Xiaotao
    BIORESOURCE TECHNOLOGY, 2016, 201 : 121 - 132
  • [2] Bio-oil from cassava peel: A potential renewable energy source
    Ki, Ong Lu
    Kurniawan, Alfin
    Lin, Chun Xiang
    Ju, Yi-Hsu
    Ismadji, Suryadi
    BIORESOURCE TECHNOLOGY, 2013, 145 : 157 - 161
  • [3] Rheology and fuel properties of slurries of char and bio-oil derived from slow pyrolysis of cassava pulp residue and palm shell
    Tangsathitkulchai, Chaiyot
    Weerachanchai, Piyarat
    Tangsathitkulchai, Malee
    KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2012, 29 (12) : 1713 - 1721
  • [4] Rheology and fuel properties of slurries of char and bio-oil derived from slow pyrolysis of cassava pulp residue and palm shell
    Chaiyot Tangsathitkulchai
    Piyarat Weerachanchai
    Malee Tangsathitkulchai
    Korean Journal of Chemical Engineering, 2012, 29 : 1713 - 1721
  • [5] Characterization of bio-oil and biochar from pyrolysis of waste corrugated cardboard
    Sotoudehnia, Farid
    Baba Rabiu, Abdulkarim
    Alayat, Abdulbaset
    McDonald, Armando G.
    Journal of Analytical and Applied Pyrolysis, 2020, 145
  • [6] Review of the pyrolysis platform for coproducing bio-oil and biochar
    Laird, David A.
    Brown, Robert C.
    Amonette, James E.
    Lehmann, Johannes
    BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, 2009, 3 (05): : 547 - 562
  • [7] Characterization of bio-oil and biochar from pyrolysis of waste corrugated cardboard
    Sotoudehnia, Farid
    Rabiu, Abdulkarim Baba
    Alayat, Abdulbaset
    McDonald, Armando G.
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2020, 145
  • [8] Washing pretreatment with light bio-oil and its effect on pyrolysis products of bio-oil and biochar
    Zhang, Shuping
    Xiong, Yuanquan
    RSC ADVANCES, 2016, 6 (07): : 5270 - 5277
  • [9] Bioslurry as a Fuel. 3. Fuel and Rheological Properties of Bioslurry Prepared from the Bio-oil and Biochar of Mallee Biomass Fast Pyrolysis
    Abdullah, Hanisom
    Mourant, Daniel
    Li, Chun-Zhu
    Wu, Hongwei
    ENERGY & FUELS, 2010, 24 (10) : 5669 - 5676
  • [10] Effects of pyrolysis parameters on physicochemical properties of biochar and bio-oil and application in asphalt
    Zhou, Xinxing
    Moghaddam, Taher Baghaee
    Chen, Meizhu
    Wu, Shaopeng
    Zhang, Yuan
    Zhang, Xiaorui
    Adhikari, Sanjeev
    Zhang, Xiao
    SCIENCE OF THE TOTAL ENVIRONMENT, 2021, 780