Internal Flowpath Optimization of Wet Multi-plate Friction Clutch

被引：0
|
作者：
Wang, Qing [1 ]
Lin, Tengjiao [1 ]
Pan, Li [1 ]
Peng, Quancheng [1 ]
机构：
[1] Chongqing Univ, State Key Lab Mech Transmiss, Chongqing, Peoples R China
来源：
PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MECHATRONICS, ROBOTICS AND AUTOMATION (ICMRA 2015) | 2015年 / 15卷
关键词：
Clutch; Flowpath; Optimization; Quadratic programming; Response surface; DESIGN;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The research about internal flowpath optimization of wet friction clutch has significant effect on the reduce of heat generating. Taking the diameter and position of nozzle as design parameters, the maximum and minimum lubricant pressure as constraint conditions, and the RMS of lubricant pressure applied on friction disc and dual plate as objective function, the parametric FEM optimum model of flowpath about clutch is established. Based on the method of second order response surface, the paper sets up the response surface function of objective function by structure parameter, and optimizes the objective function through quadratic programming. The optimized structure of flowpath is obtained, and the rationality of optimization result is verified.
引用
收藏
页码：620 / 623
页数：4
相关论文
共 50 条
  • [1] Study on the engagement characteristics of wet multi-plate friction clutch based on separating spring
    Wang, Haipeng
    Zhu, Chu
    Yang, Xingguang
    Niu, Yinkai
    Bao, Heyun
    Zhu, Rupeng
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2024, 88 (01):
  • [2] Analysis on Fluid Characteristics of Friction Plate in Wet Multi-plate Clutch Based on Computational Fluid Dynamics
    Miao, Liying
    Cheng, Xiusheng
    Liu, Zhonghua
    Li, Xuesong
    Zhang, Chuanfang
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON AUTOMATION, MECHANICAL CONTROL AND COMPUTATIONAL ENGINEERING, 2015, 124 : 2059 - 2065
  • [3] Parametric analysis of the drag torque model of wet multi-plate friction clutch with groove consideration
    Wu, Peng-hui
    Zhou, Xiaojun
    Yang, Chenlong
    Lv, Haoliang
    Lin, Tianhao
    Wu, Xuelei
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2018, 70 (07) : 1268 - 1281
  • [4] Study on Spline Stress of Separator Plates in a Wet Multi-Plate Clutch
    Ma, Biao
    Chen, Xiaobo
    Zheng, Changsong
    Yu, Liang
    Zhao, Qin
    Lu, Weichen
    MATERIALS, 2024, 17 (12)
  • [5] Optimization Design of Low Drag Torque Parameters of High-Speed Multi-Plate Wet Clutch
    Zhang L.
    Wei C.
    Hu J.
    Wei, Chao (BIT_weichao@163.com), 1600, SAE-China (42): : 1074 - 1081and1130
  • [6] Modeling of heat transfer for a wet multi-plate clutch based on empirical data
    Kim, S. C.
    Shim, S. B.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2018, 232 (12) : 1634 - 1647
  • [7] Friction behavior of innovative carbon friction linings for wet multi-plate clutches
    Stockinger, U.
    Groetsch, D.
    Reiner, F.
    Voelkel, K.
    Pflaum, H.
    Stahl, K.
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2021, 85 (01): : 115 - 127
  • [8] Friction screening tests for wet multi-plate clutches - Variation of lubricant and friction lining
    Stockinger, U.
    Pflaum, H.
    Stahl, K.
    PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018), 2018, : 402 - 404
  • [9] Friction behavior of wet multi-plate disk clutches at the transition from static to dynamic friction
    Voekel, Katharina
    Meingassner, Georg Johann
    Pflaum, Hermann
    Stahl, Karsten
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2021, 85 (01): : 129 - 138
  • [10] Friction Behavior of Wet Multi-Plate Disk Clutches at the Transition from Static to Dynamic Friction
    Meingassner, Georg Johann
    Pflaum, Hermann
    Stahl, Karsten
    KUPPLUNGEN UND KUPPLUNGSSYSTEME IN ANTRIEBEN 2017/ SCHWINGUNGSREDUZIERUNG IN MOBILEN SYSTEMEN 2017, 2017, 2309 : 159 - 172
12345