An Assessment of Cutting Force for Dental Implant Drilling

被引：0
|
作者：
Hwang, Joon [1 ]
Chung, Eui-Sik [2 ]
Lee, Yong-Kyu [3 ]
机构：
[1] Chungju Natl Univ, Dept Aeronaut & Mech Design Engn, 50 Daehak Ro, Chungju 380702, Chung Buk, South Korea
[2] Hanbat Natl univ, Dept Mech Design Engn, Daejeon 380702, South Korea
[3] Chungju Natl Univ, Dept Chem & Biol Engn, Chungju 380702, Chung Buk, South Korea
来源：
ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4 | 2012年 / 472-475卷
关键词：
Dental implant drilling; Cutting force; Tool dynamometer; Finite element analysis;
D O I：
10.4028/www.scientific.net/AMR.472-475.2542
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Bone drilling is widely used in orthopedics and dental surgery; it is a technically surgical procedure. Recent technological improvements in this area are focused on efforts to reduce forces in bone drilling. The aim of this study was to compare changes in cutting force during dental bone drilling at various drilling conditions and drill tool geometry. In the present in vitro study, dog jaw bone with uniform thickness of cortical bone was used. Cutting force changes were measured during drilling process. Drill jig was designed and manufactured to fix jaw workpiece and mounted on the tool dynamometer to measure cutting force in drilling process. The dental implant drilling tests were conducted at various cutting speeds and feed rates. In this study drilling thrust force was observed 1.5 similar to 3.6[N] for MS type implant drilling and 3.1 similar to 4.9[N] for conventional high speed steel drilling, respectively. This further research will provide a basic quantitative approach for the timely issue of wide application of implant drilling in dental and orthopedic surgery fields.
引用
收藏
页码：2542 / +
页数：2
相关论文
共 50 条
  • [1] An assessment of cutting force for dental implant drilling
    Dept. of Aeronautical and Mechanical Design Engineering, Chungju National University, 50 Daehak-ro, Chungju, Chung-Buk 380-702, Korea, Republic of
    不详
    不详
    Adv. Mater. Res., (2542-2547):
  • [2] Modeling and Experimentation of Drilling Vibration for Implant Cutting Force Presenting System
    Yu, Koyo
    Iwata, Sho
    Ohnishi, Kouhei
    Usuda, Shin
    Nakagawa, Taneaki
    Kawana, Hiromasa
    2014 IEEE 13TH INTERNATIONAL WORKSHOP ON ADVANCED MOTION CONTROL (AMC), 2014,
  • [3] Development of a Drilling Simulator for Dental Implant Surgery
    Kinoshita, Hideaki
    Nagahata, Masahiro
    Takano, Naoki
    Takemoto, Shinji
    Matsunaga, Satoru
    Abe, Shinichi
    Yoshinari, Masao
    Kawada, Eiji
    JOURNAL OF DENTAL EDUCATION, 2016, 80 (01) : 83 - 90
  • [4] Effect of misalignment on the cutting force signature in drilling
    Al-Hamdan, A
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 124 (1-2) : 83 - 91
  • [5] Cutting Force Prediction in Drilling of Anisotropic Materials
    Matsumura, Takashi
    Tamura, Shoichi
    Arrazola, Pedro
    MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2, 2012, 504-506 : 1365 - +
  • [6] Cutting Force Prediction in Drilling of Titanium Alloy
    Tamura, Shoichi
    Matsumura, Takashi
    Arrazola, Pedro J.
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (06): : 753 - 763
  • [7] MEASUREMENT OF CUTTING FORCE IN TURNING AND DRILLING CASTINGS
    MOCKLI, P
    WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1975, 65 (12): : 725 - 732
  • [8] Dental implant Retentive Force Analysis
    Soares, C.
    Cortez, A.
    Sampaio, M.
    Gobbo, P.
    Natal, R.
    Mendes, J.
    2021 GLOBAL MEDICAL ENGINEERING PHYSICS EXCHANGES/PAN AMERICAN HEALTH CARE EXCHANGES (GMEPE/PAHCE), 2021,
  • [9] Experimental Studies on the Drilling Heat During Dental Implant
    Hung, C.
    Lin, C. -J.
    Ling, H. I.
    PORO-MECHANICS IV, 2009, : 151 - 156
  • [10] Extracting cutting force coefficients from drilling experiments
    Hamade, RF
    Seif, CY
    Ismail, F
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (3-4): : 387 - 396
12345