An improved four-parameter model on stress analysis of adhesive layer in plated beam

The prediction of stresses in an adhesive layer is helpful in revealing the mechanism of debonding failure in plated beams. This study proposes an improved analytical model for the stress analysis of an adhesive layer in a plated beam. The beam and the soffit plate are individually modelled as a single Timoshenko sub-beam with separate rotations, while the adhesive layer is modelled as a two-dimensional elastic continuum in plane stress, which considers different adherend-adhesive interface stresses. The internal forces of the adhesive layer are assumed to satisfy the Timoshenko beam theory, and the shear deformation and bending moment of the adhesive layer can be considered. The internal forces and displacements of the adhesive layer are fully considered in the displacement compatibility equations, and deformable interfaces are assembled so that the effect of interface stresses on local deformation is captured. Based on equilibrium equations and displacement continuity, the governing differential equations of beam forces are derived, and then the analytical solutions of interface strews and stresses along the thickness of the adhesive layer are obtained. Comparisons of the results of the finite-element analysis and the existing four-parameter model solutions show that the present model is reasonable. The influence of adhesive thickness on stress distributions in adhesive layers is also investigated.