FEA of Micro-hole Drilling in Stainless Steel Based on DEFORM-3D

被引：2
|
作者：
Sun, Quan [1 ]
Gao, Bo [1 ]
Yang, Chongchang [1 ]
Chen, Bingbing [1 ]
机构：
[1] Minist Educ, Engn Res Ctr Adv Text Machinery, Shanghai 201620, Peoples R China
来源：
ADVANCED RESEARCH ON MATERIAL ENGINEERING, CHEMISTRY, BIOINFORMATICS II | 2012年 / 531卷
关键词：
DEFORM-3D; FEA; Stainless steel; Micro-hole; Thrust force; Cutting torque;
D O I：
10.4028/www.scientific.net/AMR.531.566
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to better understand the micro-hole cutting processes in stainless steel, the cutting process of 1Cr18Ni9Ti stainless steel was modeled and simulated by FEA (Finite Element Analysis) based on DEFORM-3D software. The influence of rotation speed and feed speed on the thrust force and torque of 1Cr18Ni9Ti stainless steel were analyzed. Meanwhile, the comparisons of simulated results and theoretical calculation results were taken into consideration. It is found that the simulation data from DEFORM-3D agreed well with the theoretical calculation results. It confirms that the results of simulation based on DEFORM-3D have a high level of reliability. The findings of the present study provide a new way to systematically investigate the stainless steel micro-hole drilling process.
引用
收藏
页码：566 / 570
页数：5
相关论文
共 50 条
  • [1] Simulation of Stainless steel drilling mechanism Based on Deform-3D
    Gao, Xingjun
    Li, Huan
    Liu, Qing
    Zou, Ping
    Liu, Feng
    MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1-3, 2011, 160-162 : 1685 - +
  • [2] Simulation of Micro Blanking Process of Square Hole with Fillet Based on DEFORM-3D
    Zhou, Shining
    Yang, Xiaolong
    Sun, Jing
    Xu, Wenji
    Liu, Xin
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MATERIAL, MECHANICAL AND MANUFACTURING ENGINEERING, 2015, 27 : 2068 - 2072
  • [3] Some Investigations on Drilling of Aluminium Alloy from FEA-Based Simulation Using DEFORM-3D
    Sreenivasulu, R.
    Rao, Ch Srinivasa
    ADVANCES IN SIMULATION, PRODUCT DESIGN AND DEVELOPMENT, 2020, : 3 - 15
  • [4] FEA Simulation analysis of tube hydroforming process using DEFORM-3D
    Sreenivasulu, Bathina
    Prasanthi, G.
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1187 - 1197
  • [5] Vibration Drilling the 0Cr18Ni9Ti Stainless Steel Micro-hole
    Zhang, Peng
    Mei, Changhong
    Guo, Xingyu
    ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3, 2012, 217-219 : 1592 - +
  • [6] Annular drilling process and quality control neural network model of stainless steel micro-hole with femtosecond laser
    Yue D.
    Sun H.
    Yang X.
    Sun J.
    Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering, 2021, 50 (10):
  • [7] Research on Vibration Drilling 1Cr18Ni9Ti Stainless Steel Micro-hole
    Zhang, Peng
    Jing, Yan
    Guo, Xingyu
    MANUFACTURING ENGINEERING AND AUTOMATION II, PTS 1-3, 2012, 591-593 : 423 - 427
  • [8] INVESTIGATION OF HOLE PROFILES IN DEEP MICRO-HOLE DRILLING OF AISI 420 STAINLESS STEEL USING POWDER-MIXED DIELECTRIC FLUIDS
    Yilmaz, Volkan
    MATERIALI IN TEHNOLOGIJE, 2016, 50 (05): : 667 - 675
  • [9] Micro-hole drilling with femtosecond fiber laser
    Huang, Huan
    Yang, Lih-Mei
    Liu, Jian
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING (LAMOM) XVIII, 2013, 8607
  • [10] Micro-Hole Drilling on Glass SubstratesA Review
    Hof, Lucas A.
    Abou Ziki, Jana
    MICROMACHINES, 2017, 8 (02)
12345