Numerical simulation of flame stabilization in meso-scale vortex combustion

被引：3

作者：

Saputro, Herman ^{[1
]}

Juwantono, Heri ^{[1
]}

Bugis, Husin ^{[1
]}

Wijayanto, Danar Susilo ^{[1
]}

Fitriana, Laila ^{[2
]}

Perdana, Valiant Lukad ^{[1
]}

Purwanto, Aris ^{[1
]}

Arianto, Eka Dwi ^{[1
]}

Bima, Marshal ^{[1
]}

Pratama, Yudha ^{[1
]}

Muslim, Riyadi ^{[1
]}

Firdani, Tutuko ^{[1
]}

机构：

[1] Univ Sebelas Maret, Dept Mech Engn Educ, Pabelan, Surakarta, Indonesia

[2] Univ Sebelas Maret, Dept Math Educ, Jl Ir Sutami 36A, Surakarta, Indonesia

来源：

3RD ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE (AASEC 2018) | 2018年 / 197卷

关键词：

CATALYTIC COMBUSTOR; MICRO-COMBUSTOR; DESIGN;

D O I：

10.1051/matecconf/201819708005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A meso-scale vortex combustor has been designed in order to common flame quenching problems in meso/micro scale burning. Numerical simulations using Computational Fluid Dynamic (CFD) Ansys Release 19.0 Academic program was performed to determine a stable combustion flame. Combustor chamber made from two steps, first step diameter 6 mm with 4 mm depth, second step diameter size 8mm with 5 mm depth. This simulation used mixture of propane fuel-air. The fuel is fed through two channels of fuel inlet with 2 mm diameter. The variable of fuel flow rate was investigated in order to get the boundary of extinction limit and blow off limit of flame (stable flame region). The results show that the flame stable limit by using meso-scale vortex combustor more widely than other types of micro combustor. Therefore, the meso-scale vortex combustor that was developed could be used to overcome the flame quenching problems.

引用

页数：5

共 50 条

[1] Combustion in meso-scale vortex chambers
Wu, Ming-hsun
Wang, Yanxing
Yang, Vigor
Yetter, Richard A.
PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2007, 31 : 3235 - 3242
[2] Numerical simulation of hydrogen-air combustion in meso-scale IC engine
Zhang, Li
Wang, Ying-Zhang
Chongqing Daxue Xuebao/Journal of Chongqing University, 2010, 33 (06): : 25 - 30
[3] Vortex combustion and heat transfer in meso-scale with thermal recuperation
Khaleghi, Mostafa
Hosseini, Seyed Ehsan
Wahid, M. A.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2015, 66 : 250 - 258
[4] INFLUENCE OF MODIFIED AIR ON COMBUSTION CHARACTERISTICS IN MESO-SCALE VORTEX COMBUSTOR
Khaleghi, Mostafa
Wahid, Mazlan A.
Saat, A.
Fairus, M. Y. M.
Sies, M. M.
Kamaruzaman, N.
Rahman, Md. Mizanur
Amri, M. Mohammad
Mohammed, H. A.
JURNAL TEKNOLOGI, 2016, 78 (10-2): : 15 - 19
[5] Investigations of asymmetric non-premixed meso-scale vortex combustion
Khaleghi, Mostafa
Hosseini, Seyed Ehsan
Wahid, Mazlan Abdul
APPLIED THERMAL ENGINEERING, 2015, 81 : 140 - 153
[6] Meso-scale studies in fracture of concrete: A numerical simulation
Mungule, Mahesh
Raghuprasad, B. K.
COMPUTERS & STRUCTURES, 2011, 89 (11-12) : 912 - 920
[7] Direct numerical simulation of catalytic combustion in a meso-scale channel with non-planar walls
Chabane, Adam M.
Truffin, Karine
Angelberger, Christian
COMBUSTION AND FLAME, 2020, 222 : 85 - 102
[8] MESO-SCALE NUMERICAL SIMULATION OF FIBER COMPOSITES-PART II: NUMERICAL SIMULATION
Huang Jun
Huang Peiyan
PROCEEDINGS OF THE 6TH INTERNATIONAL SPECIALTY CONFERENCE ON FIBRE REINFORCED MATERIALS, 2010, : 157 - 164
[9] A meso-scale numerical method for the simulation of chloride diffusivity in concrete
Du, Xiuli
Jin, Liu
Ma, Guowei
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2014, 85 : 87 - 100
[10] Flame stability and combustion characteristics of liquid fuel in a meso-scale burner with porous media
Chen, Xinjian
Li, Junwei
Feng, Mang
Zhao, Dan
Shi, Baolu
Wang, Ningfei
FUEL, 2019, 251 : 249 - 259

← 1 2 3 4 5 →