Production of three certified reference materials for water content based on mixed solutions of butanol, xylene and propylene carbonate

Certified reference materials (CRMs) for water content with good accuracy and homogeneity are required for calibration or validation of the Karl Fischer titration and for establishing the traceability of water content results. Three such CRMs were produced and certified: GBW 13512, 13513 and 13514 are based on solvent mixtures consisting of butanol, xylene and propylene carbonate with water contents of 10.01, 1.067 and 0.139 mg/g, respectively, certified by the Karl Fischer coulometric and volumetric methods. These CRMs were prepared, dispensed and sealed under a humidity equal to the equilibrated humidity of their headspace. In this way, the between-bottle homogeneity uncertainty (u (H,rel)) could be kept as low as u (H,rel) = 0.12 % for GBW 13512. The certification methods, that is, Karl Fischer coulometric and volumetric methods, were calibrated using in-house water standards prepared by gravimetry. The results were traceable to the SI unit of mass. The relative deviation of the water contents between the two methods for GBW 13512 was only 0.05 %. The expanded uncertainty (U, k = 2) of three CRMs was 0.12, 0.024 and 0.012 mg/g, respectively. These CRMs for water content with good accuracy can be applied in the calibration or validation of measurement procedures to ensure accurate and comparable results.