The Effect of Solution Treatment on Microstructure and Mechanical Properties of Ti-6Mo-6Nb-8Sn Alloy

被引：5
|
作者：
Senopati, Galih [1 ,2 ]
Sutowo, Cahya [1 ,2 ]
Kartika, Ika [2 ]
Suharno, Bambang [1 ]
机构：
[1] Univ Indonesia, Fac Engn, Dept Met & Mat Engn, Kampus UI Depok, Depok 16424, Indonesia
[2] Indonesian Inst Sci, Res Ctr Met & Mat, Bldg 470,Puspiptek Technol Pk Serpong, Tangerang Selatan 15314, Banten, Indonesia
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 13卷
关键词：
Ti-6Mo-6Nb-8Sn; vacuum arc - re-melting furnace; beta phase; solution treated; elastic modulus;
D O I：
10.1016/j.matpr.2019.03.218
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of solution treatment on mechanical properties and microstructure of beta Ti-6Mo-6Nb-8Sn alloy were investigated. The Ti-6Mo-6Nb-8Sn alloy was fabricated by the vacuum arc re-melting furnace. The obtain ingots were homogenized at 1,100 degrees C for 7 hours and hot rolled at 1100 degrees C to 4 mm thick, then solution treated at various temperatures of 900, 1,000, 1,100 degrees C and soaking times of 45, 60, 75 minutes followed by water quenching. Ti-6Mo-6Nb-8Sn had full equiaxed microstructure after solution treated. The beta phase was observed in all solution treated conditions. The elastic modulus was lower than that of commercially available Ti-6Al-4V alloy. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：224 / 228
页数：5
相关论文
共 50 条
  • [1] Effect of solution treatment on the microstructure and mechanical properties of Ti-6Al-6Mo hot-rolled alloy
    Alfirano
    Friandani, S. S.
    Sutowo, C.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2019, 13 (02) : 4857 - 4868
  • [2] MICROSTRUCTURE INVESTIGATION AND MECHANICAL PROPERTIES OF Ti-6Al-2Sn-4Zr-6Mo ALLOY PROCESSED BY HOT ROLLING AND SOLUTION TREATMENT
    Alluaibi, Mohammed Hayder
    Alturaihi, Saleh Sabah
    Raducanu, Doina
    Rusea, Adrian
    Cinca, Ion
    Nocivin, Anna
    Cojocaru, Vasile Danut
    29TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2020), 2020, : 1117 - 1122
  • [3] The Influence of Solution Treatment Temperature on Microstructure and Mechanical Properties of Ti6Al6Nb
    Senopati, Galih
    Sutowo, Cahya
    Rokhmanto, Fendy
    Waluyo, Merliana K.
    Alfirano
    METALLURGY AND ADVANCED MATERIAL TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT, 2018, 1964
  • [4] Effect of LaB6 on the microstructure evolution and mechanical properties of Ti-45Al-8Nb alloy
    Fang, Yingchun
    Jin, Kaihang
    Liu, Cheng
    Wang, Haiwen
    Wei, Xiao
    Ding, Qingqing
    Bei, Hongbin
    Zhao, Xinbao
    Zhang, Ze
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 938
  • [5] Effect of Mn on the Microstructure and Mechanical Properties of Ti-6Al-4Mo Alloy
    Huang Qingguo
    Ying Zixiang
    Wang Zhilei
    Zhang Zhihao
    Liu Xinhua
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (03) : 718 - 725
  • [6] Effect of Mn in New β Titanium Alloy Ti-6Nb-6Mo on Corrosion Behavior and Mechanical Properties
    Supriadi, Sugeng
    Immanuel, Tentues
    Sutowo, Cahya
    Lucky, Grantheart
    Senopati, Galih
    Suharno, Bambang
    PROCEEDINGS OF THE 3RD INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM 2019): EXPLORING NEW INNOVATION IN METALLURGY AND MATERIALS, 2020, 2232
  • [7] Effect of heat treatment conditions on the mechanical properties of Ti-6Mo-4Sn alloy for orthodontic wires
    Hida, Mayu
    Miyazawa, Ken
    Tsuruta, Shozo
    Kurosawa, Masahiro
    Hata, Yuki
    Kawai, Tatsushi
    Goto, Shigemi
    DENTAL MATERIALS JOURNAL, 2013, 32 (03) : 462 - 467
  • [8] Effects of Aging Treatment on Microstructure Evolution and Mechanical Properties of Ti-6Al-3Nb-2Zr-Mo Alloy
    Jiang Haiyang
    Jiang Fuqing
    Wang Bing
    Xu Bin
    Sun Mingyuel
    RARE METAL MATERIALS AND ENGINEERING, 2023, 52 (06) : 2002 - 2009
  • [9] Effects of Aging Treatment on Microstructure Evolution and Mechanical Properties of Ti-6Al-3Nb-2Zr-Mo Alloy
    Jiang, Haiyang
    Jiang, Fuqing
    Wang, Bing
    Xu, Bin
    Sun, Mingyue
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2023, 52 (06): : 2002 - 2009
  • [10] Microstructure and mechanical properties of Ti-35Nb-6Ta alloy after thermomechanical treatment
    Malek, J.
    Hnilica, F.
    Vesely, J.
    Smola, B.
    Bartakova, S.
    Vanek, J.
    MATERIALS CHARACTERIZATION, 2012, 66 : 75 - 82
12345