Residual stress effects on fatigue crack growth in a Ti-6Al-4V friction stir weld

被引：60
|
作者：
Pasta, S. [1 ]
Reynolds, A. P. [2 ]
机构：
[1] Univ Palermo, Dipartimento Meccan, I-90128 Palermo, Italy
[2] Univ S Carolina, Dept Mech Engn, Columbia, SC 29208 USA
来源：
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2008年 / 31卷 / 07期
关键词：
fatigue crack growth propagation; friction stir welding; residual stress; titanium alloy;
D O I：
10.1111/j.1460-2695.2008.01258.x
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Recent studies have illustrated a predominant role of the residual stress on the fatigue crack growth in friction stir welded joints. In this study, the role of the residual stress on the propagation of fatigue cracks orthogonal to the weld direction in a friction stir welded Ti-6Al-4V joint was investigated. A numerical prediction of the fatigue crack growth rate in the presence of the residual stresses was carried out using AFGROW software; reasonable correspondence between the predictions and the experimental results were observed when the effects of residual stress were included in the simulation.
引用
收藏
页码：569 / 580
页数：12
相关论文
共 50 条
  • [1] Fracture toughness and fatigue crack growth in Ti-6Al-4V friction stir welds
    Edwards, P.
    Ramulu, M.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2015, 38 (08) : 970 - 982
  • [2] Residual stresses and fatigue crack growth in friction surfacing coated Ti-6Al-4V sheets
    Dovzhenko, Gleb
    Hanke, Stefanie
    Staron, Peter
    Maawad, Emad
    Schreyer, Andreas
    Horstmann, Manfred
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 262 : 104 - 110
  • [3] Stress ratio effects on small fatigue crack growth in Ti-6Al-4V
    Caton, M. J.
    John, R.
    Porter, W. J.
    Burba, M. E.
    INTERNATIONAL JOURNAL OF FATIGUE, 2012, 38 : 36 - 45
  • [4] Effects of stress ratio and temperature on fatigue crack growth in a Ti-6Al-4V alloy
    Ding, J
    Hall, R
    Byrne, J
    INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (10-12) : 1551 - 1558
  • [5] Role of microstructure on the fatigue crack propagation behavior of a friction stir welded Ti-6Al-4V
    Muzvidziwa, Milton
    Okazaki, Masakazu
    Suzuki, Kenji
    Hirano, Satoshi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 652 : 59 - 68
  • [6] An investigation of the effects of stress ratio and crack closure on the micromechanisms of fatigue crack growth in Ti-6Al-4V
    Dubey, S
    Soboyejo, ABO
    Soboyejo, WO
    ACTA MATERIALIA, 1997, 45 (07) : 2777 - 2787
  • [7] Effect of Weld Tool Geometry on Friction Stir Welded Ti-6Al-4V
    Querin, J. A.
    Rubisoff, H. A.
    Schneider, J. A.
    TRENDS IN WELDING RESEARCH, 2009, : 108 - 112
  • [8] An investigation of the effects of stress ratio on the micromechanisms of and short fatigue crack growth in Ti-6Al-4V
    Sinha, V
    Mercer, C
    Soboyejo, WO
    FATIGUE BEHAVIOR OF TITANIUM ALLOYS, 1999, : 75 - 87
  • [9] Probabilistic modeling of fatigue crack growth in Ti-6Al-4V
    Soboyejo, W.O.
    Shen, W.
    Soboyejo, A.B.O.
    Key Engineering Materials, 2001, 200 : 81 - 98
  • [10] Probabilistic modeling of fatigue crack growth in Ti-6Al-4V
    Shen, W
    Soboyejo, ABO
    Soboyejo, WO
    INTERNATIONAL JOURNAL OF FATIGUE, 2001, 23 (10) : 917 - 925
12345