Investigation of the structure of wear resistant coatings obtained by plasma powder surfacing

被引：3
|
作者：
Shapovalov, Alexey N. [1 ]
Kalugina, Olga. B. [2 ]
Dema, Roman. R. [2 ]
机构：
[1] Natl Univ Sci & Technol MISiS, Leninskiy Prospekt 4, Moscow 119049, Russia
[2] Nosov Magnitogorsk State Tech Univ, Lenin Ave 38, Magnitogorsk 455000, Russia
来源：
INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2017) | 2017年 / 129卷
关键词：
D O I：
10.1051/matecconf/201712902044
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper studied the structure of the deposited coating, formed on 45 steel with a plasma-powder surfacing wear-resistant white cast iron. The effect of surfacing conditions and other technological influences on the weld pool during surfacing - current modulation, rapid cooling of the weld beads by blowing air and the rapid cooling of the flowing water of the substrate. Tests have been conducted to determine the plasma-powder coating modes of high alloyed wear-resistant coatings which provide in the middle of the metal deposit the structure and properties that ensure maximum wear resistance. Recommendations of using of cooling systems modes has given to obtain an even distribution of microhardness over the fusion zone.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Structure and wear resistance of SHS TiC plus HSS composite coatings, obtained by electron beam surfacing
    Baranovskiy, A. V.
    Pribytkov, G. A.
    Krinitcyn, M. G.
    Firsina, I. A.
    6TH INTERNATIONAL CONGRESS ENERGY FLUXES AND RADIATION EFFECTS, 2018, 1115
  • [2] Features of Wear-Resistant Cast Iron Coating Formation During Plasma-Powder Surfacing
    Vdovin, K. N.
    Emelyushin, A. N.
    Nefed'ev, S. P.
    METAL SCIENCE AND HEAT TREATMENT, 2017, 59 (5-6) : 302 - 307
  • [3] Mathematical Model of Optimization of Controlled Parameters of the Plasma Surfacing Technological Process of Wear-Resistant Coatings
    Kartsev, S. V.
    JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2020, 49 (09) : 823 - 828
  • [4] Features of Wear-Resistant Cast Iron Coating Formation During Plasma-Powder Surfacing
    K. N. Vdovin
    A. N. Emelyushin
    S. P. Nefed’ev
    Metal Science and Heat Treatment, 2017, 59 : 302 - 307
  • [5] Mathematical Model of Optimization of Controlled Parameters of the Plasma Surfacing Technological Process of Wear-Resistant Coatings
    S. V. Kartsev
    Journal of Machinery Manufacture and Reliability, 2020, 49 : 823 - 828
  • [6] INVESTIGATION OF WEAR-RESISTANCE OF BORIDE COATINGS OBTAINED FROM COMPOSITE POWDER MEDIA
    Galynskaya, N. A.
    Kukhareva, N. G.
    Petrovich, S. N.
    Babul, T.
    Obukhovich, Z.
    SCIENCE & TECHNIQUE, 2012, (01): : 10 - U217
  • [7] Pore Formation in the Laminar Structure of Wear-Resistant Modified Powder Coatings
    Vinokurov G.G.
    Struchkov N.F.
    Bol’shakov A.M.
    Russian Engineering Research, 2019, 39 (09): : 749 - 754
  • [8] Structure and properties of 76Φ steel in plasma powder surfacing
    Tyuftyaev A.S.
    Steel in Translation, 2013, 43 (07) : 460 - 464
  • [9] Investigation of composite powders with a carbide phase for plasma spraying of wear resistant coatings
    Ilyuschenko, A
    Shevtsov, A
    Okovity, V
    Steinhauser, S
    THERMAL SPRAY 2001: NEW SURFACES FOR A NEW MILLENNIUM, 2001, : 1119 - 1122
  • [10] Structure and properties of the wear resistant coatings obtained in the PVD and CVD processes on tool ceramics
    Dobrzanski, L. A.
    Pakula, D.
    ADVANCED MATERIALS AND TECHNOLOGIES, 2006, 513 : 119 - 133
12345