Measurement of the average permeability of natural fibre mats in resin transfer moulding application

被引：6
|
作者：
Rouison, D
Couturier, M
Panthapulakkal, S
Sain, M
机构：
[1] Univ Toronto, Fac Forestry, Ctr Biocomposites & Biomat Proc, Toronto, ON M5S 3B3, Canada
[2] Univ New Brunswick, Dept Chem Engn, Fredericton, NB E3B 5A3, Canada
来源：
POLYMERS & POLYMER COMPOSITES | 2006年 / 14卷 / 03期
关键词：
D O I：
10.1177/096739110601400302
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The permeability of hemp fibre mats used in a resin transfer moulding process were computed from the measured mould filling time, using a simplified mathematical approach. This approach could be applied because of the simple geometry of the mould and because a certain number of assumptions were made The permeability values obtained were found to decrease with increasing fibre content. In addition the hemp fibre permeability was found to be an order of magnitude lower than the value for glass fibre at a fibre content of 19 vol%. This preliminary work shows the importance of studying the permeability of natural fibre systems in order to provide the data necessary for the proper design of industrial moulds.
引用
收藏
页码：229 / 238
页数：10
相关论文
共 50 条
  • [1] Measurement techniques and effects on in-plane permeability of woven cloths in resin transfer moulding
    Univ of Surrey, Surrey, United Kingdom
    Compos Part A Appl Sci Manuf, 5 (401-408):
  • [2] Measurement techniques and effects on in-plane permeability of woven cloths in resin transfer moulding
    Lekakou, C
    Johari, MAK
    Norman, D
    Bader, MG
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (05) : 401 - 408
  • [3] Permeability prediction in the impregnation stage of Resin Transfer Moulding
    Liu Zhuang
    Wu Xiaoqing
    MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1-3, 2011, 160-162 : 1211 - 1216
  • [4] Heat transfer of fibre beds in resin transfer moulding:: an experimental approach
    Henne, M
    Ermanni, P
    Deléglise, M
    Krawczak, P
    COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (09) : 1191 - 1202
  • [5] Micro-CT measurement of fibre misalignment: Application to carbon/epoxy laminates manufactured in autoclave and by vacuum assisted resin transfer moulding
    Nguyen, Nghi Q.
    Mehdikhani, Mahoor
    Straumit, Ilya
    Gorbatikh, Larissa
    Lessard, Larry
    Lomov, Stepan V.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, 104 : 14 - 23
  • [6] Measurement of void collapse during resin transfer moulding
    Lundstrom, TS
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (03) : 201 - 214
  • [7] An experimental study of the permeability and capillary pressure in resin-transfer moulding
    Amico, S
    Lekakou, C
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (13) : 1945 - 1959
  • [8] A model for fibre washout during high injection pressure resin transfer moulding
    Bodaghi, Masoud
    Simacek, Pavel
    Advani, Suresh G.
    Correia, Nuno C.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2018, 37 (13) : 865 - 876
  • [9] High quality flax fibre composites manufactured by the resin transfer moulding process
    Oksman, K
    ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, : 2645 - 2649
  • [10] Dielectric flow sensing in resin transfer moulding of carbon fibre reinforced composites
    Skordos, AA
    Partridge, IK
    PLASTICS RUBBER AND COMPOSITES, 2000, 29 (08) : 391 - 394
12345