Preparation and Cutting Performance of YT15 Cemented Carbide Tools with Ti(C, N)/Al2O3 Composite Coating

被引：0
|
作者：
Gao, Yuxin [1 ]
Zhang, Guangliang [1 ]
机构：
[1] Taizhou Univ, Zhejiang Prov Key Lab Testing & Deep Proc Messuri, Taizhou 318000, Peoples R China
来源：
MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4 | 2013年 / 690-693卷
关键词：
Electro-spark deposition (ESD); cemented carbide tools; Ti(C; N)/Al2O3 composite coating; cutting performance; PVD;
D O I：
10.4028/www.scientific.net/AMR.690-693.2175
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Ti(C, N)/Al2O3 composite coating was prepared on surface of YT15 cemented carbide by using electro-spark deposition process. The surface morphology, energy spectrum analysis and microhardness of the coating were investigated, and the cutting forces and wear resistance of the tools with and without Ti(C, N)/Al2O3 composite coating were studied by cutting tests. The results show that the microhardness of the YT15 cemented carbide with Ti(C, N)/Al2O3 composite coating increased 181Hv, and the coating tools had better wear resistance and lower cutting force.
引用
收藏
页码：2175 / 2178
页数：4
相关论文
共 50 条
  • [1] Cemented carbide cutting tools life with nanocrystalline Al2O3 layer deposited by MOCVD
    Sawka, A.
    Kwatera, A.
    Woznicki, A.
    Zasadzinski, J.
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2016, 16 (03) : 351 - 364
  • [2] Preparation of Al2O3/Ti(C,N)/ZrO2/CaF2@Al(OH)3 Ceramic Tools and Cutting Performance in Turning
    Chen, Zhaoqiang
    Zhang, Shuai
    Guo, Runxin
    Ji, Lianggang
    Guo, Niansheng
    Li, Qi
    Xu, Chonghai
    MATERIALS, 2019, 12 (23)
  • [3] Fabrication and performance of Al2O3/(W,Ti)C + Al2O3/TiC multilayered ceramic cutting tools
    Deng Jianxin
    Duan Zhenxing
    Yun Dongling
    Zhang Hui
    Ai Xing
    Zhao Jun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (4-5): : 1039 - 1047
  • [4] Study on mechanism of highly adherence CVD-coated Ti(C,N)-bonding layer-α-Al2O3 films on cemented carbide cutting tools
    Ishii, Toshio
    Shima, Nobuhiko
    Ueda, Hiroshi
    Gonda, Masayuki
    Okayama, Shirou
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2000, 47 (02): : 121 - 125
  • [5] Wear behavior of Ti(N,C)-Al2O3 coated cemented carbide tools during milling Ti2AlNb-based alloy
    Ma, Xiaodi
    Xu, Jiuhua
    Ding, Wenfeng
    Lv, Dongsheng
    Fu, Yucan
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII, 2014, 589-590 : 361 - 365
  • [6] Thermal crack network on CVD TiCN/α-Al2O3 coated cemented carbide cutting tools
    Gassner, Martina
    Schalk, Nina
    Tkadletz, Michael
    Czettl, Christoph
    Mitterer, Christian
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 81 : 1 - 6
  • [7] Investigations on femtosecond laser-modified microgroove-textured cemented carbide YT15 turning tool with promotion in cutting performance
    Ding Ye
    Yang Lijun
    Cheng Bai
    Wang Xiaoli
    Wang Yang
    Xie Hui
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (9-12): : 4367 - 4379
  • [8] PVD-Al2O3-coated cemented carbide cutting tools
    Åstrand, M
    Selinder, TI
    Fietzke, F
    Klosterman, H
    SURFACE & COATINGS TECHNOLOGY, 2004, 188 (1-3 SPEC.ISS.): : 186 - 192
  • [9] Investigations on femtosecond laser-modified microgroove-textured cemented carbide YT15 turning tool with promotion in cutting performance
    Ding Ye
    Yang Lijun
    Cheng Bai
    Wang Xiaoli
    Wang Yang
    Xie Hui
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 4367 - 4379
  • [10] Study of initial notch wear during turning of stainless steel with CVD Al2O3/Ti(C,N) coated cemented carbide tools
    Sirtuli, Larissa Juliana
    Boing, Denis
    Bushlya, Volodymyr
    Norgren, Susanne
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2025, 129
12345