A novel abrasive blasting process: Abrasive medium classification and CFD simulations

被引：0
|
作者：
Ozkaya, E. [1 ]
Bayraktar, E. [2 ]
Turek, S. [2 ]
Biermann, D. [1 ]
机构：
[1] TU Dortmund, Inst Machining Technol, D-44227 Dortmund, Germany
[2] TU Dortmund, Inst Appl Math LS3, D-44227 Dortmund, Germany
来源：
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK | 2013年 / 44卷 / 06期
关键词：
abrasive particles; deburring; micro milling; computational fluid dynamics; micro abrasive water-jet blasting;
D O I：
10.1002/mawe.201300124
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study concerns the determination of the significant factors for an innovative deburring process: low pressure abrasive water-jet blasting. The abrasive medium aluminum oxide (Al2O3) is classified according to the individual characteristics of different grain sizes. Then, the particle behavior in the air jet is analyzed with an optical measuring method, Particle Image Velocimetry (PIV); the velocity profile and the particle distribution of the dispersed system are obtained. Computational Fluid Dynamics (CFD) simulations were verified by comparing the experimental and numerical results, and the velocity range for the abrasive particles has been specified.
引用
收藏
页码：577 / 585
页数：9
相关论文
共 50 条
  • [1] Simulation and improvement of the micro abrasive blasting process
    Karpuschewski, B
    Hoogstrate, AM
    Achtsnick, M
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (01): : 251 - 254
  • [2] Modelling and evaluation of the micro abrasive blasting process
    Achtsnick, M
    Geelhoed, PF
    Hoogstrate, AM
    Karpuschewski, B
    WEAR, 2005, 259 (1-6) : 84 - 94
  • [3] Abrasive blasting for Avanti
    Birch, S
    AEROSPACE ENGINEERING, 2001, 21 (03) : 12 - 12
  • [4] INVESTIGATION OF ABRASIVE BLASTING
    JONES, JR
    GARDOS, MN
    LUBRICATION ENGINEERING, 1971, 27 (11): : 393 - &
  • [5] Computer simulations in abrasive grinding process
    Eda, H
    INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1998, 32 (04): : 233 - 238
  • [6] CFD simulation of the Abrasive Flow Machining process
    Uhlmann, E.
    Schmiedel, C.
    Wendler, J.
    15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 209 - 214
  • [7] Abrasive Technologies with Dry Ice as a Blasting Medium-Review
    Dzido, Aleksandra
    Krawczyk, Piotr
    ENERGIES, 2023, 16 (03)
  • [8] THE VENTILATION OF ABRASIVE BLASTING CABINS
    PFEIFFER, W
    STAUB REINHALTUNG DER LUFT, 1986, 46 (09): : 390 - 393
  • [9] Performance of abrasive blasting respirators
    Glindmeyer, H
    ANNALS OF OCCUPATIONAL HYGIENE, 1998, 42 (01): : 61 - 62
  • [10] ABRASIVE BLASTING UNIT (ABU)
    Braehler, Georg
    Welbers, Philipp
    Kelly, Mike
    Brunetti, Gianfranco
    PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL REMEDIATION AND RADIOACTIVE WASTE MANAGEMENT 2009, VOL 2, 2010, : 217 - 227
12345