Vibration - Impact study on AlMg4.5Mn reinforced nanoclay composites

被引：6
|
作者：
Kumar, P. S. Samuel Ratna [1 ]
Alexis, S. John [2 ]
Mohan, M. Saravana [3 ]
Sudhagar, P. Edwin [4 ]
Madara, Sahith Reddy [5 ]
机构：
[1] Kumaraguru Coll Technol, Dept Mech Engn, Coimbatore, Tamil Nadu, India
[2] Kumaraguru Coll Technol, Dept Automobile Engn, Coimbatore, Tamil Nadu, India
[3] Kumaraguru Coll Technol, Dept Mechatron Engn, Coimbatore, Tamil Nadu, India
[4] Vellore Inst Technol, Sch Mech Engn, Vellore, Tamil Nadu, India
[5] Univ Sharjah, Sharjah Acad Astron Space Sci & Technol, Sharjah, U Arab Emirates
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 28卷
关键词：
AlMg4.5Mn; Nanoclay; Low-velocity impact test; Natural frequency; Vibration; BEHAVIOR;
D O I：
10.1016/j.matpr.2020.01.096
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study shows the vibration and low velocity impact behaviour of AlMg4.5Mn reinforced nanoclay nanocomposites at room temperature. Composite samples with different weight percentage of nanoclay were fabricated using liquid state synthesis casting technique, to achieve homogeneous dispersion of Nanoclay. The material characterization was studied by Scanning Electron Microscope (SEM) and Energy -dispersive X-ray spectroscopy (EDS). From the study it was concluded that the Hardness value of the aluminium alloy reinforced nanoclay was increased in addition of nanoclay weight percentage. The natural frequencies of impacted AlMg4.5Mn reinforced nanoclay composites was found to be increased in addition of 2.5 wt% nanoclay. (C) 2019 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 2nd International Conference on Recent Advances in Materials & Manufacturing Technologies.
引用
收藏
页码：1140 / 1143
页数：4
相关论文
共 50 条
  • [1] PLASTIC INSTABILITIES IN AlMg4.5Mn ALLOY SHEET
    Molnarova, Orsolya
    Dobron, Patrik
    Chmelik, Frantisek
    METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, : 1551 - 1555
  • [2] POROSITY OF WELDED JOINTS OF AlMg4.5Mn ALLOY
    Kastelec-Macura, Sandra
    Prokic-Cvetkovic, Radica
    Jovicic, Radomir
    Popovic, Olivera
    Burzic, Meri
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2008, 8 (02): : 114 - 120
  • [3] AlMg4.5Mn铝合金的焊接
    戴宝坤
    徐禾水
    焊接, 1995, (10) : 15 - 18
  • [4] Structure and mechanical properties of AlMg4.5 and AlMg4.5Mn wires extruded by KoBo method
    1600, Committee of Metallurgy (59):
  • [5] STRUCTURE AND MECHANICAL PROPERTIES OF AlMg4.5 AND AlMg4.5Mn WIRES EXTRUDED BY KoBo METHOD
    Jaskowski, M.
    Piela, K.
    Blaz, L.
    ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59 (02) : 473 - 479
  • [6] Fracture Behavior of AlMg4.5Mn Weld Metal at Different Temperatures under Impact Loading
    Prokic Cvetkovic, Radica
    Popovic, Olivera
    Radovic, Ljubica
    Sedmak, Aleksandar
    Cvetkovic, Ivana
    SUSTAINABILITY, 2023, 15 (02)
  • [7] Investigation of Ultrasonic Assisted Milling of Aluminum Alloy AlMg4.5Mn
    Kuruc, Marcel
    Marek, Zvoncan
    Peterka, Jozef
    24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013, 2014, 69 : 1048 - 1053
  • [8] THE MICROSTRUCTURE OF MG MODIFIED BY SURFACE ALLOYING WITH AN ALMG4.5MN WIRE
    Mola, Renata
    Bucki, Tomasz
    Dziadon, Andrzej
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1582 - 1587
  • [9] CRACKING RESISTANCE OF AlMg4.5Mn ALLOY TIG WELDED JOINTS
    Jovicic, Radomir
    Sedmak, Aleksandar
    Prokic-Cvetkovic, Radica
    Bulatovic, Srdjan
    Buyukyildirim, Galip
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2011, 11 (03): : 205 - 208
  • [10] Fatigue crack initiation and growth in AlMg4.5Mn butt weldments
    Brandt, U
    Lawrence, FV
    Sonsino, CM
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2001, 24 (02) : 117 - 126
12345