Very high strain rate deformation twinning behaviour of Ti-6Al-4V

被引:11
|
作者
Laine, Steven J. [1 ]
Knowles, Kevin M. [1 ]
Rugg, David [2 ]
机构
[1] Univ Cambridge, Rolls Royce Univ Technol Ctr, Dept Mat Sci & Met, 27 Charles Babbage Rd, Cambridge CB3 0FS, England
[2] Rolls Royce PLC, POB 31, Derby DE24 8BJ, England
基金
英国工程与自然科学研究理事会;
关键词
Ti-6Al-4V; Deformation twinning; High strain rate; Electron back scattered diffraction; VARIANTS; TITANIUM; ALUMINUM;
D O I
10.1016/j.mtla.2020.100762
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Equiaxed fine-grained and coarse-grained samples of h.c.p. alpha phase Ti-6Al-4V with trace amounts of retained b.c.c. beta phase were ballistically tested at room temperature. The deformed microstructures were characterised by electron back scattered diffraction. The extensive deformation twinning observed in the.. phase in both samples was limited to the {10 (1) over bar2} and {11 (2) over bar1} tensile twinning modes. These two deformation twinning types have very different morphologies: thin {11 (2) over bar1} deformation twins span multiple alpha phase grain boundaries, while the wider {10 (1) over bar2} deformation twins are usually limited to individual grains, reorienting almost entire grains to a twinned orientation. Both {10 (1) over bar2} and {11 (2) over bar1} deformation twins are able to propagate across low angle alpha lath boundaries, but only the {11 (2) over bar1} deformation twinning types can propagate across high angle alpha grain boundaries.
引用
收藏
页数:17
相关论文
共 50 条
  • [1] On the correlation between macrozones and twinning in Ti-6Al-4V at very high strain rates
    Wielewski, Euan
    Siviour, Clive R.
    Petrinic, Nik
    SCRIPTA MATERIALIA, 2012, 67 (03) : 229 - 232
  • [2] Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature
    Prakash, D. G. Leo
    Ding, R.
    Moat, R. J.
    Jones, I.
    Withers, P. J.
    da Fonseca, J. Quinta
    Preuss, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (21-22): : 5734 - 5744
  • [3] The effects of strain rate and temperature on the compressive deformation behaviour of Ti-6Al-4V alloy
    Lee, WS
    Lin, MT
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 71 (02) : 235 - 246
  • [4] The Very High Cycle Fatigue Behaviour of Ti-6Al-4V Alloy
    Janecek, M.
    Novy, F.
    Harcuba, P.
    Strasky, J.
    Trsko, L.
    Mhaede, M.
    Wagner, L.
    ACTA PHYSICA POLONICA A, 2015, 128 (04) : 497 - 502
  • [5] Plastic deformation and fracture behaviour of Ti-6Al-4V alloy loaded with high strain rate under various temperatures
    Lee, Woei-Shyan
    Lin, Chi-Feng
    Materials Science and Engineering A, 1998, A241 (1-2): : 48 - 59
  • [6] Plastic deformation and fracture behaviour of Ti-6Al-4V alloy loaded with high strain rate under various temperatures
    Lee, WS
    Lin, CF
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 241 (1-2): : 48 - 59
  • [7] Deformation and failure behaviour of Ti-6Al-4V alloy under high rate shear loading
    Lee, WS
    Huang, SZ
    Computational Ballistics II, 2005, 40 : 229 - 238
  • [8] Shear band widening mechanism in Ti-6Al-4V under high strain rate deformation
    Bisht, Anuj
    Kumar, Subhash
    Pang, Ka Ho
    Zhou, Rongxin
    Roy, Anish
    Silberschmidt, Vadim V.
    Suwas, Satyam
    JOURNAL OF MATERIALS RESEARCH, 2020, 35 (13) : 1623 - 1634
  • [9] The influence of microstructure and strain rate on the compressive deformation behavior of Ti-6Al-4V
    Johnson, AJW
    Bull, CW
    Kumar, KS
    Briant, CL
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34 (02): : 295 - 306
  • [10] The influence of microstructure and strain rate on the compressive deformation behavior of Ti-6Al-4V
    A. J. Wagoner Johnson
    C. W. Bull
    K. S. Kumar
    C. L. Briant
    Metallurgical and Materials Transactions A, 2003, 34 (2) : 295 - 306