Tool Wear in Turning of Graphitic Hybrid Metal Matrix Composites

被引：31
|
作者：
Basavarajappa, S. [1 ]
机构：
[1] Univ BDT Coll Engn, Dept Mech Engn, Davanagere 577004, Karnataka, India
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2009年 / 24卷 / 04期
关键词：
Abrasion; Cutting speed; Cutting tools; Depth of cut; Feed rate; Flank wear; Hybrid metal matrix composites; Machining; Self-lubricating; SEM; Tool wear; Turning; PARTICLE-REINFORCED ALUMINUM; MACHINABILITY; TEMPERATURE; PERFORMANCE;
D O I：
10.1080/10426910802714431
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study presents an experimental investigation on tool wear in machining Al 2219/15SiCp and Al 2219/15SiCp-3Gr (hybrid) composites at different cutting conditions with carbide, coated carbide, and polycrystalline diamond (PCD) tools. An attempt is made in the present investigation to study the effect of graphite incorporation in Al 2219/15SiCp composite on tool wear. The results reveal that the incorporation of graphite in Al 2219/15SiCp composite reduces tool wear at all cutting conditions. This is due to graphite, which reduces the coefficient of friction between tool and workpiece and between tool and chip interface. PCD tool performs better than carbide and coated carbide tools.
引用
收藏
页码：484 / 487
页数：4
相关论文
共 50 条
  • [1] The Effect of Cutting Tool Wear Behaviors on Feed Rates in Turning of Metal Matrix Composites
    Pul, Muharrem
    Seker, Ulvi
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2014, 17 (03): : 99 - 106
  • [2] Analytical modeling of tool wear progression during turning particulate reinforced metal matrix composites
    Kishawy, HA
    Kannan, S
    Balazinski, M
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2005, 54 (01) : 55 - 58
  • [3] Abrasive wear behavior of hybrid metal matrix composites
    Song, JI
    Bae, SI
    Ham, KC
    Han, KS
    FRACTURE AND STRENGTH OF SOLIDS, PTS 1 AND 2, 2000, 183-1 : 1267 - 1272
  • [4] Metal matrix composites - MMC - Turning: Comparison of tool materials
    Borsellino, C
    Lo Casto, S
    Lo Valvo, E
    Ruisi, VF
    AMST 02: ADVANCED MANUFACTURING SYSTEMS AND TECHNOLOGY, PROCEEDINGS, 2002, (437): : 151 - 158
  • [5] Experimental investigation on surface roughness, tool wear and cutting force in turning of hybrid (Al7075+SiC + Gr) metal matrix composites
    Kannan, A.
    Mohan, R.
    Viswanathan, R.
    Sivashankar, N.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06): : 16529 - 16540
  • [6] Tool wear in turning ceramic reinforced aluminum matrix composites-A review
    Das, Dipti Kanta
    Mishra, Purna Chandra
    Singh, Saranjit
    Thakur, Ratish Kumar
    JOURNAL OF COMPOSITE MATERIALS, 2015, 49 (24) : 2949 - 2961
  • [7] Turning of metal matrix composites
    D'Errico, GE
    Calzavarini, R
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 119 (1-3) : 257 - 260
  • [8] Mechanical and wear behaviour of aluminium metal matrix hybrid composites
    Kumar, Siddesh N. G.
    Ravindranath, V. M.
    Shankar, G. S. Shiva
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 908 - 917
  • [9] Acoustic emission monitoring during turning of metal matrix composite and tool wear
    Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam-603 102, Tamil Nadu, India
    Mater Eval, 2006, 3 (323-330):
  • [10] Acoustic Emission Monitoring during Turning of Metal Matrix Composite and Tool Wear
    Mukhopadhyay, C. K.
    Venugopal, S.
    Jayakumar, T.
    Nagarajan, R.
    Mannan, S. L.
    Raj, Baldev
    MATERIALS EVALUATION, 2006, 64 (03) : 323 - 330
12345