Duplex nucleation in Mg-Al-Zn-Mn alloys with carbon inoculation

被引：22

作者：

Han, Guang ^{[1
]}

Liu, Xiangfa ^{[1
]}

机构：

[1] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Peoples R China

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2009年 / 487卷 / 1-2期

关键词：

Metals and alloys; Microstructure; Transmission electron microscopy (TEM); Al0.89Mn1.11; Al8Mn5; Al4C3; GRAIN REFINING MECHANISM; REFINEMENT; MAGNESIUM; AZ31;

D O I：

10.1016/j.jallcom.2009.08.037

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Duplex nucleation in Mg-Al-Zn-Mn alloys with carbon inoculation was investigated in this study. Carbon addition brought remarkable grain refinement to both AZ31 (Mg-3Al-1Zn-0.45Mn) and AZ63 (Mg-6Al-3Zn-0.35Mn). Al4C3-coated Al0.89Mn5 and Al4C3-coated Al8Mn5 act as the duplex nucleation sites in carbon-treated AZ31 and AZ63, respectively. The morphologies and sizes of dominant Al-Mn phases in both alloys (Al0.89Mn1.11 in AZ31 and Al8Mn5 in AZ63) did not change significantly after grain refinement of the alloys, and these Al-Mn particles are believed to have low nucleating efficiency for primary alpha-Mg. In contrast, Al4C3, the interfacial phase between primary a-Mg and duplex nucleating particles, is the direct potent nucleating substrate for primary alpha-Mg. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：194 / 197

页数：4

共 50 条

[1] Duplex nucleation in Mg-Al-Zn-Mn alloys with carbon inoculation
Han, Guang
Liu, Xiangfa
Journal of Alloys and Compounds, 2009, 487 (1-2): : 194 - 197
[2] Improvement of Commercial Mg-Al-Zn-Mn Alloys by Rolling
Bozhko, S. A.
Kolobov, Yu. R.
Betsofen, S. Ya.
PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON STRUCTURAL, MECHANICAL AND MATERIAL ENGINEERING (ICSMME 2015), 2016, 19 : 27 - 30
[3] Thermodynamic analysis of processability of Mg-Al-Zn-Mn alloys for rheocasting
Guo, H. -M.
Wen, F. -M.
Yang, X. -J.
Jin, H. -L.
Zhang, A. -S.
MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (15) : 1903 - 1909
[4] Influence of Thermomechanical Treatment on the Properties of Alloys of the Mg-Al-Zn-Mn System
Kug, Kh
Khalifa, Sh S. M.
MATERIALS SCIENCE, 2020, 56 (02) : 218 - 223
[5] EFFECT OF LOW ADDITIVES OF CALCIUM ON CORROSION RESISTANCE OF ALLOYS OF THE Mg-Al-Zn-Mn SYSTEM
Koltygin, A. V.
Bazlova, T. A.
METAL SCIENCE AND HEAT TREATMENT, 2012, 53 (11-12) : 584 - 588
[6] Study on mechanical properties of Mg-Al-Zn-Mn alloys cast by two different methods
Gao Deming
Zhang Yuhui
Hua Qin
Zhai Qiqie
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 507 (1-2): : 1 - 5
[7] The Treatment of the Surfaces of Mg-Al-Zn-Mn and Ti-Al-Zr-Nb Alloys by Shot Peening
Mrva, Peter
Kottfer, Daniel
ACTA POLYTECHNICA HUNGARICA, 2011, 8 (02) : 33 - 43
[8] Influence of β-Mg17Al12 and Al-Mn intermetallic compounds on the corrosion behaviour of cast and solution treated Mg-Al-Zn-Mn alloys
Yang, Yang
Deng, Yangchao
Zhang, Ruifeng
Su, Yuqing
Liu, Siyue
Gourlay, Christopher M.
Zeng, Guang
CORROSION SCIENCE, 2023, 222
[9] Strengthening of Mg-Al-Zn-Mn alloy using SiC/Al nanocomposite extrusion
Emadi, P.
Andilab, B.
Borodianskiy, K.
Ravindran, C.
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 922
[10] Effects of erbium addition on microstructure and mechanical properties of as-cast Mg-Al-Zn-Mn magnesium alloys
Tezhong Zhuzao Ji Youse Hejin, 2007, 11 (824-826):

← 1 2 3 4 5 →