Interfacial ageing of high temperature carbon/bismaleimide composites

被引：47
|
作者：
Lowe, A
Fox, B
Otieno-Alego, V
机构：
[1] Australian Natl Univ, Dept Engn, Canberra, ACT 0200, Australia
[2] Deakin Univ, Sch Engn & Technol, Geelong, Vic 3217, Australia
[3] Univ Canberra, Canberra, ACT 2601, Australia
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2002年 / 33卷 / 10期
关键词：
polymer-matrix composites PMCs; environmental degradation; delamination; high-temperature properties;
D O I：
10.1016/S1359-835X(02)00163-X
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ageing studies were performed on a carbon fibre-bismaleimide (CBR320/328) system developed by the CSIRO in Australia, with a fibre volume fraction of 55%. This material has a glass transition temperature of 302degreesC and the effect of ageing at 204 and 250degreesC on the interfacial region was studied. A variety of test techniques were employed to characterise interfacial property changes (mode I delamination, SEM, Raman); chemical changes due to ageing (Raman, FTIR); changes in glass transition temperature (DMTA) and weight loss. The results showed that both interfacial and resin degradation mechanisms differed between the two temperatures. It can, therefore, be concluded that accelerated ageing is not applicable to this system. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：1289 / 1292
页数：4
相关论文
共 50 条
  • [1] Properties of Novel Bismaleimide Resins and Thermal Ageing Effects on the ILSS Performance of Their Carbon Fibre-Bismaleimide Composites
    Liu, Siyang
    Chen, Yizi
    Chen, Ping
    Xu, Dongwei
    Xiong, Xuhai
    Wang, Jing
    POLYMER COMPOSITES, 2019, 40 (E1283-E1293) : E1283 - E1293
  • [2] Progress of High Temperature Interfacial Properties of Carbon Fiber Composites
    Wang J.
    Li C.
    Geng W.
    He X.
    Zhou J.
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2024, 40 (03): : 163 - 171
  • [3] Interfacial Properties of Domestic T700 Carbon Fiber/Bismaleimide Composites
    Wang Ying-fen
    Liu Gang
    Peng Gong-qiu
    Li Shao-liang
    Xie Fu-yuan
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2018, 46 (04): : 140 - 145
  • [4] Polyquinoline/bismaleimide composites as high-temperature-resistant materials
    Appl Phys Lett, 11 (1311):
  • [5] Polyquinoline/bismaleimide composites as high-temperature-resistant materials
    Nalwa, HS
    Suzuki, M
    Takahashi, A
    Kageyama, A
    APPLIED PHYSICS LETTERS, 1998, 72 (11) : 1311 - 1313
  • [6] Effect of Sizing Agents on Surface Properties of Carbon Fibers and Interfacial Adhesion of Carbon Fiber/Bismaleimide Composites
    Yang, Tian
    Zhao, Yan
    Liu, Hansong
    Sun, Mingchen
    Xiong, Shu
    ACS OMEGA, 2021, 6 (36): : 23028 - 23037
  • [7] Synergy of interfacial reinforcing and damage monitoring at elevated temperature by constructing fluorescence interphase of perylenediimide nanowires in carbon fiber/bismaleimide composites
    Sun, Yuhang
    Su, Qingfu
    Li, Gang
    Yang, Xiaoping
    Zuo, Xiaobiao
    COMPOSITES PART B-ENGINEERING, 2025, 292
  • [8] Improvement of interfacial properties in bismaleimide composites using functionalized graphene oxide grafted carbon fiber
    Li, Wei
    Li, Qiang
    Yue, Yuan Zhi
    Wang, Ming Yu
    Ren, Rong
    POLYMER ENGINEERING AND SCIENCE, 2018, 58 (06): : 886 - 893
  • [9] High temperature stability of bismaleimide carbon fibre composite materials
    Spratt, G.R.
    Akay, M.
    Mechanical and corrosion properties. Series A, Key engineering materials, 1995, 99-100 : 3 - 10
  • [10] TOUGH, PROCESSIBLE, HIGH-TEMPERATURE BISMALEIMIDE (BMI) MATRIX COMPOSITES
    MORGAN, RJ
    JUREK, RJ
    DONNELLAN, T
    YEN, A
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1992, 203 : 502 - POLY
12345