Multifunctional Properties of Alumina Composites Reinforced by a Hybrid Filler

被引：14
|
作者：
Ahmad, Kaleem [1 ]
Pan, Wei [1 ]
Qu, Zhixue [1 ]
机构：
[1] Tsinghua Univ, Dept Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
来源：
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2009年 / 6卷 / 01期
基金：
中国国家自然科学基金;
关键词：
WALL CARBON NANOTUBES; THERMAL-CONDUCTIVITY; ELECTRICAL-PROPERTIES; FRACTURE-TOUGHNESS; MATRIX; MICROSTRUCTURE; NANOCOMPOSITES; MECHANISMS; STRENGTH; POLYMER;
D O I：
10.1111/j.1744-7402.2008.02257.x
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Hybrid microstructure design has been used to fabricate alumina composites reinforced by 5 vol% of multiwalled carbon nanotube (MWNT) together with different (1, 2, 3 vol%) contents of SiC nanoparticles by spark plasma sintering. The mechanical, thermal, and electrical properties of the composites were determined as a function of the SiC volume fraction. The thermal conductivity decreased for 1 and 2 vol% of SiC, while for 3 vol%, it increased. Substantial improvements in the fracture toughness, bending strength, and electrical conductivity were observed and attributed to a synergetic effect of the MWNT and SiC nanoparticles in the hybrid microstructure design.
引用
收藏
页码：80 / 88
页数：9
相关论文
共 50 条
  • [1] MECHANICAL & TRIBOLOGICAL BEHAVIOR OF ALUMINA NANO FILLER REINFORCED EPOXY HYBRID COMPOSITES
    Raghavendra, Gujjala
    Ojha, Shakuntala
    Acharya, S. K.
    Pal, S. K.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 2B, 2013,
  • [2] Enhanced thermal properties in a hybrid graphene-alumina filler for epoxy composites
    Zeng, Cen
    Lu, Shaorong
    Song, Laifu
    Xiao, Xiane
    Gao, Jian
    Pan, Lulu
    He, Zihai
    Yu, Jinhong
    RSC ADVANCES, 2015, 5 (45): : 35773 - 35782
  • [3] Experimental investigation of Mode-I fracture behavior of nano alumina filler reinforced hybrid composites
    Kumar, K. Dilip
    Shantharaja, M.
    MATERIALS TODAY-PROCEEDINGS, 2022, 52 : 1026 - 1029
  • [4] Tribological properties of filler and green filler reinforced polymer composites
    Saravanan, D.
    Sollapur, Shrishail B.
    Anjappa, S. B.
    Malla, Chandrabhanu
    Prasad, M. Satya
    Vignesh, S.
    MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 2065 - 2072
  • [5] Selected Construction Properties of Hybrid Epoxy Composites Reinforced with Carbon Fabric and Alumina
    Krzyzak, Aneta
    Relich, Szymon
    Kosicka, Ewelina
    Szczepaniak, Robert
    Mucha, Mateusz
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2022, 16 (02) : 240 - 248
  • [6] THERMOELECTRIC PROPERTIES OF EXPANDED GRAPHITE AS FILLER OF MULTIFUNCTIONAL CEMENT COMPOSITES
    Pichor, Waldemar
    Frac, Maksymilian
    COMPOSITES THEORY AND PRACTICE, 2012, 12 (03): : 205 - 209
  • [7] Fracture toughness of alumina filler filled glass fabric reinforced epoxy composites
    Sandeep, B.
    Suresha, B.
    Divakar, H. N.
    MATERIALS TODAY-PROCEEDINGS, 2021, 43 : 1792 - 1797
  • [8] Polypropylene hybrid composites reinforced with long glass fibres and particulate filler
    Hartikainen, J
    Hine, P
    Szabó, JS
    Lindner, M
    Harmia, T
    Duckett, RA
    Friedrich, K
    COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (02) : 257 - 267
  • [9] Moisture and Filler Induced Effects on the Dynamic Mechanical Properties of Glass Fiber Reinforced Epoxy Hybrid Composites
    Suchitra, M.
    Renukappa, N. M.
    Ranganathaiah, C.
    Pasang, T.
    Rajan, J. Sundara
    IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2016, 23 (06) : 3631 - 3640
  • [10] Carbon black/nickel hybrid filler reinforced conductive polypropylene composites
    Gill, Yasir Qayyum
    Irfan, Muhammad Shafiq
    Khan, Fareed ul Haq
    Saeed, Farhan
    Ehsan, Hira
    Shakoor, Abdul
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
12345