The dynamic crack propagation behavior of mode I interlaminar crack in unidirectional carbon/epoxy composites

被引：29

作者：

Liu, Huifang ^{[1
,2
]}

Meng, Xianghao ^{[1
,2
]}

Zhang, Huawen ^{[1
,2
]}

Nie, Hailiang ^{[1
]}

Zhang, Chao ^{[1
,2
]}

Li, Yulong ^{[1
,2
]}

机构：

[1] Northwestern Polytech Univ, Shaanxi Key Lab Impact Dynam & Its Engn Applicat, Xian 710072, Shaanxi, Peoples R China

[2] Northwestern Polytech Univ, Sch Aeronaut, Xian 710072, Shaanxi, Peoples R China

来源：

ENGINEERING FRACTURE MECHANICS | 2019年 / 215卷

基金：

中国国家自然科学基金;

关键词：

Polymer matrix composites; Cohesive zone modelling; Delamination; Dynamic fracture; Finite element analysis; IMPACT-INDUCED DELAMINATION; FRACTURE-TOUGHNESS; FIBER COMPOSITES; LOADING RATE; INITIATION; GROWTH; TEMPERATURE;

D O I：

10.1016/j.engfracmech.2019.05.004

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The dynamic propagation behavior of the mode I interlaminar crack in unidirectional carbon/epoxy composites was investigated by using double cantilever beam (DCB) specimens. The dynamic interlaminar propagation toughness was obtained using a hybrid experimental-numerical method. Using a novel electromagnetic Hopkinson bar system, pure mode I fracture was guaranteed by symmetrical opening displacement rates in the range of 10 - 30 m/s. The crack velocities before crack arrest were between 100 and 250 m/s, which was monitored by crack-propagation gauges and high-speed photography. To model the interlaminar crack, a user-defined cohesive element was developed, which integrated the experimentally measured crack propagation history. The propagation toughness was calculated by the energy balance method and the dynamic J-integral technique. Results from extensive studies indicate that the dynamic propagation toughness is not a single-valued function of the crack velocity for mode I interlaminar crack. Both the external dynamic loads and the interaction with the bending waves emanating from the moving crack tip affect the behavior of the crack propagation.

引用

页码：65 / 82

页数：18

共 50 条

[1] Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates
de Morais, A. B.
Pereira, A. B.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (03) : 785 - 794
[2] Dynamic mode-I crack-propagation in a carbon/epoxy composite
Guo, C
Sun, CT
COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (09) : 1405 - 1410
[3] Interlaminar dynamic crack propagation
State Univ of New York at Stony, Brook, Stony Brook, United States
Int J Solids Struct, 17-18 (2657-2675):
[4] Interlaminar Mode I crack growth energy release rate of carbon/carbon composites
Krause, T.
Tushtev, K.
Koch, D.
Grathwohl, G.
ENGINEERING FRACTURE MECHANICS, 2013, 100 : 38 - 51
[5] Effects of plasma modified carbon nanotube interlaminar coating on crack propagation in glass epoxy composites
Williams, John
Graddage, Neil
Rahatekar, Sameer
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 54 : 173 - 181
[6] Dynamic Mode I and Mode II Crack Propagation in Fiber Reinforced Composites
Bruno, Domenico
Greco, Fabrizio
Lonetti, Paolo
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2009, 16 (06) : 442 - 455
[7] INTERLAMINAR DYNAMIC CRACK-PROPAGATION
NAKAMURA, T
KUSHNER, A
LO, CY
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1995, 32 (17-18) : 2657 - 2675
[8] Mode-I interlaminar fracture toughness in unidirectional carbon-fibre/epoxy composites
Barikani, M
Saidpour, H
Sezen, M
IRANIAN POLYMER JOURNAL, 2002, 11 (06) : 413 - 423
[9] Cyclic Interlaminar Crack Growth in Unidirectional and Braided Composites
Stelzer, S.
Pinter, G.
Wolfahrt, M.
Brunner, A. J.
Noisternig, J.
FATIGUE BEHAVIOUR OF FIBER REINFORCED POLYMERS: EXPERIMENTS AND SIMULATIONS, 2012, : 49 - 63
[10] Mode I crack propagation in polydimethylsiloxane-short carbon fiber composites
Hou, Nan
Guo, Qiang
Zairi, Fahmi
Ding, Ning
COMPOSITE STRUCTURES, 2025, 352

← 1 2 3 4 5 →