Corrosion properties of Ti3SiC2 and Ti3AlC2 in static liquid lead-bismuth eutectic at 500°C

For lead-cooled fast reactors and accelerator-driven subcritical systems, the surface corrosion behavior of candidate structural materials in lead-bismuth eutectic (LBE) is a key issue, which determines whether the material is applicable. The candidate materials of two typical MAX phases, Ti3SiC2 and Ti3AlC2, were immersed in static LBE with saturated oxygen concentration at 500 degrees C for up to 3000 h. The corrosion behaviors of Ti3SiC2 and Ti3AlC2 were analyzed by scanning electron microscope, energy-dispersive X-ray, X-ray diffraction, and Raman spectra. The experimental results showed that elements interdiffusion between LBE and sample matrix occurred on both Ti3SiC2 and Ti3AlC2 surfaces, which led to the formation of the diffusion layer. The dominant component of the diffusion layer is PbTiO3, which makes the corroded surface fragile in a stress environment. Besides, there were differences in structures of corroded sample surfaces between Ti3SiC2 and Ti3AlC2. The corrosion layer of Ti3SiC2 consisted of two layers, while only one single layer formed on Ti3AlC2 surfaces. The stable oxide layer consisting of SiO2 and TiO2 can protect Ti3SiC2 samples from further LBE corrosion and maintain the integrity of the surfaces. For Ti3AlC2 samples, it is hard to form a continuous Al2O3 protective layer, thus no stable oxide layer was detected on the corroded surfaces. Compared with Ti3AlC2, Ti3SiC2 showed better corrosion resistance in LBE.