DEMONSTRATION OF MHZ PIEZOELECTRIC MICROMACHINED ULTRASONIC TRANSDUCERS (PMUTS) ARRAY AND THE POTENTIAL APPLICATION IN BIOMEDICAL THERAPIES

被引:0
|
作者
Wang, Dengke [1 ]
Ji, Yucheng [1 ]
Wang, Shaokun [1 ]
Lyu, Haochen [3 ]
Zhang, Songsong [1 ,2 ]
机构
[1] Shanghai Univ, Sch Microelect, Shanghai, Peoples R China
[2] Shanghai Melon Tech Co Ltd, Shanghai, Peoples R China
[3] Rutgers State Univ, New Brunswick, NJ USA
关键词
MEMS; PMUTs; cavity silicon on insulator (CSOI); ultrasonic treatment;
D O I
10.1109/MEMS58180.2024.10439433
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper reports the potential for treating dry eye disease using ScAlN-based piezoelectric micromachined ultrasonic transducers (PMUTs). PMUTs were fabricated on 8-inch cavity silicon-on-insulator wafers. The PMUTs contain 744 (24 x 31) square cells with the dimension of 1.5 x 2.0 mm(2). The wafer-level electrical characterization showed excellent wafer level uniformity and yield. The resonant frequency variation across the wafer is less than 10%. At resonance (11.6 MHz), the PMUTs array obtained a transmit sensitivity of 18.4 kPa/V @ 10 mm in oil. Ultrasonic heating experiments were performed on a silicone block. A temperature rise of 4. was achievable in 48-52 seconds. The heating efficiency of the PMUTs is approximately 2.2 times greater than that of the bulk transducer. These results suggest that PMUTs could potentially replace conventional bulk transducers in the treatment of dry eye disease.
引用
收藏
页码:955 / 958
页数:4
相关论文
共 50 条
  • [1] Demonstration of MHz piezoelectric micromachined ultrasonic transducers array and its potential application for biomedical treatment
    Wang, Dengke
    Ji, Yucheng
    Wang, Shaokun
    Zhang, Songsong
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2024, 34 (03)
  • [2] Passive Temperature Compensation of Piezoelectric Micromachined Ultrasonic Transducers (PMUTs)
    Karuthedath, Cyril Baby
    Sebastian, Abhilash Thanniyil
    Sillanpaa, Teuvo
    Pensala, Tuomas
    2022 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IEEE IUS), 2022,
  • [3] AlN Piezoelectric Micromachined Ultrasonic Transducers (PMUTs) as proximity Sensors
    Ledesma, Eyglis
    Torres, Francesc
    Uranga, Arantxa
    Barniol, Nuria
    2023 14TH SPANISH CONFERENCE ON ELECTRON DEVICES, CDE, 2023,
  • [4] Piezoelectric Micromachined Ultrasonic Transducers (PMUTs): Performance Metrics, Advancements, and Applications
    Birjis, Yumna
    Swaminathan, Siddharth
    Nazemi, Haleh
    Raj, Gian Carlo Antony
    Munirathinam, Pavithra
    Abu-Libdeh, Aya
    Emadi, Arezoo
    SENSORS, 2022, 22 (23)
  • [5] Design of piezoelectric micromachined ultrasonic transducers (pMUTs) for high pressure output
    Mingjun Wang
    Yufeng Zhou
    Microsystem Technologies, 2017, 23 : 1761 - 1766
  • [6] Design of piezoelectric micromachined ultrasonic transducers (pMUTs) for high pressure output
    Wang, Mingjun
    Zhou, Yufeng
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23 (06): : 1761 - 1766
  • [7] Effect of humid environment on electromechanical performance of piezoelectric micromachined ultrasonic transducers (PMUTs)
    Tong, Zhihao
    Wu, Zhipeng
    Gu, Yuandong Alex
    Lou, Liang
    SENSORS AND ACTUATORS A-PHYSICAL, 2024, 366
  • [8] Numerical and Experimental Study of the Dynamic Behavior of Piezoelectric Micromachined Ultrasonic Transducers (pMUTs)
    Choi, H. S.
    Ding, J. L.
    Bose, S.
    Bandyopadhyay, A.
    2006 IEEE ULTRASONICS SYMPOSIUM, VOLS 1-5, PROCEEDINGS, 2006, : 1943 - 1946
  • [9] An Ultrasonic Proximity Sensing Skin for Robot Safety Control by Using Piezoelectric Micromachined Ultrasonic Transducers (PMUTs)
    Tong, Zhihao
    Hu, Haiyan
    Wu, Zhipeng
    Xie, Shuxin
    Chen, Guodong
    Zhang, Songsong
    Lou, Liang
    Liu, Huicong
    IEEE SENSORS JOURNAL, 2022, 22 (18) : 17351 - 17361
  • [10] A two-dimensional electromechanical composite plate model for piezoelectric micromachined ultrasonic transducers (pMUTs)
    Choi, H. S.
    Anderson, M. J.
    Ding, J. L.
    Bandyopadhyay, A.
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2010, 20 (01)