Cryogenic CO2 capture from oxy-combustion flue gas by a hybrid distillation plus physical absorption process

Hybrid flowsheets are defined, in the context of process intensification, as alternatives sui-table for replacing energy-intensive separation methods through the combination of more than one unit operation. Given the undoubted importance of carbon capture, utilization, and storage (CCUS) in the next decades in the path to net-zero emissions and even negative emissions scenarios, this work focuses on CO2 capture from an oxy-combustion flue gas by means of a distillation-based hybrid process that avoids CO2 freeze-out, which is capable of delivering a liquid CO2-rich stream that can in principle be pumped to transport pressures with lower energy consumption in comparison to conventional post-combustion CO2 capture processes based on chemical absorption. A distillation-based process and a hybrid distillation + physical absorption process have been studied based on simulations in Aspen Hysys (R) V11 using the Peng-Robinson Equation of State and the "Acid Gas - Physical Solvents" thermo-dynamic property package. Firstly, a CO2 capture process based on cryogenic distillation has been proposed and a sensitivity analysis on the operating pressure and specified CO2 re-covery has been performed in order to determine the most convenient configuration, bal-ancing capital and operating costs. Then, a hybrid capture process has been proposed and analyzed, where cryogenic distillation is the bulk removal step and physical absorption into a mixture of homologues of the dimethylether of polyethylene glycol (DEPG) is the finishing step. Energy and economic analyses have shown that the hybrid process, delivering a CO2 product respecting the stringent purity requirement on the oxygen content for application for Enhanced Oil Recovery (EOR) and in the food industry is less energy intensive than the standalone cryogenic distillation, though it is characterized by higher capital costs.(c) 2023 The Author(s). Published by Elsevier Ltd on behalf of Institution of Chemical Engineers. This is an open access article under the CC BY license (http://creative-commons.org/licenses/by/4.0/).