PLA PLASTICIZED WITH ESTERS FOR PACKAGING APPLICATIONS

被引：0

作者：

Bondarev, Andreea ^{[1
,2
]}

Cuc, Stanca ^{[1
,3
]}

Bombos, Daniel ^{[1
]}

Perhaita, Ioana ^{[3
]}

Bombos, Dorin ^{[1
,2
]}

机构：

[1] S C Medacril SRL, 8 Carpa?i St, Medias, Sibiu, Romania

[2] Petr Gas Univ Ploiesti, 39 Bucuresti Blvd, Ploiesti 100680, Romania

[3] Univ Babes Bolyai, Inst Chem Raluca Ripan, 30 Fantanele St, Cluj Napoca 400294, Romania

来源：

STUDIA UNIVERSITATIS BABES-BOLYAI CHEMIA | 2023年 / 68卷 / 02期

关键词：

PLA; bioplasticizer; DSC analyses; vitrification temperature; flexural strength; water absorption; FILMS;

D O I：

10.24193/subbchem.2023.2.05

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

In this study, polylactic acid PLA was melt blended with bis(2-(2-butoxyethoxy)ethyl) adipate, tributyl citrate and/or sorbitan monooleate. The thermo-mechanical analysis of plasticized PLA highlighted an improvement in its behavior. Thus, the plasticization of PLA with the tested esters favored the lowering of its vitrification temperature and the bending resistance of the tested materials at room temperature varied in an area of interest for all the tested plasticizers. No significant difference was noted between the maximum flexural strengths and the elongation at deformation recorded at 25 & DEG;C and those at 4 & DEG;C for the three recipes. Also, the weight loss of PLA recipes in contact with water decreases in the presence of hydrophobic plasticizers.

引用

页码：73 / 84

页数：12

共 50 条

[1] Effect of physical ageing on properties of PLA plasticized with oligomeric esters of lactic acid
Castaldo, R.
Ambrogi, V.
Avella, M.
Avolio, R.
Carfagna, C.
Cocca, M.
Errico, M. E.
Gentile, G.
TIMES OF POLYMERS (TOP) AND COMPOSITES 2014, 2014, 1599 : 138 - 141
[2] Preparation and Recycling of Plasticized PLA
Scaffaro, Roberto
Morreale, Marco
Mirabella, Filippo
La Mantia, Francesco Paolo
MACROMOLECULAR MATERIALS AND ENGINEERING, 2011, 296 (02) : 141 - 150
[3] Availability of PLA/SIS blends for packaging and medical applications
Luchian-Lupu, Ana-Maria
Zaharescu, Traian
Lungulescu, Eduard-Marius
Rapa, Maria
Iovu, Horia
RADIATION PHYSICS AND CHEMISTRY, 2020, 172
[4] Development of PLA based nanocellulose films for packaging applications
Gond, R. K.
Gupta, M. K.
JOURNAL OF THE INDIAN CHEMICAL SOCIETY, 2020, 97 (10A) : 1621 - 1625
[5] Plasticized Poly(lactic acid)-Poly(hydroxybutyrate) (PLA-PHB) Blends Incorporated with Catechin Intended for Active Food-Packaging Applications
Patricia Arrieta, Marina
del Mar Castro-Lopez, Maria
Rayon, Emilio
Fernando Barral-Losada, Luis
Manuel Lopez-Vilarino, Jose
Lopez, Juan
Victoria Gonzalez-Rodriguez, Maria
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 2014, 62 (41) : 10170 - 10180
[6] Transparent, plasticized cellulose-glycerol bioplastics for food packaging applications
Benitez, Jose J.
Florido-Moreno, Pedro
Porras-Vazquez, Jose M.
Tedeschi, Giacomo
Athanassiou, Athanassia
Heredia-Guerrero, Jose A.
Guzman-Puyol, Susana
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2024, 273
[7] Ultrasonic Welding of Plasticized PLA Films
Stoehr, Neda
Baudrit, Benjamin
Haberstroh, Edmund
Nase, Michael
Heidemeyer, Peter
Bastian, Martin
JOURNAL OF APPLIED POLYMER SCIENCE, 2015, 132 (04)
[8] Characterization of PLA-limonene blends for food packaging applications
Arrieta, Marina P.
Lopez, Juan
Ferrandiz, Santiago
Peltzer, Mercedes A.
POLYMER TESTING, 2013, 32 (04) : 760 - 768
[9] On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications
Patricia Arrieta, Marina
Dolores Samper, Maria
Aldas, Miguel
Lopez, Juan
MATERIALS, 2017, 10 (09):
[10] PREPARATION AND DEGRADATION STUDY OF HDPE/PLA POLYMER BLENDS FOR PACKAGING APPLICATIONS
Torres-Huerta, A. M.
Dominguez-Crespo, M. A.
Palma-Ramirez, D.
Flores-Vela, A., I
Castellanos-Alvarez, E.
Del Angel-Lopez, D.
REVISTA MEXICANA DE INGENIERIA QUIMICA, 2019, 18 (01): : 251 - 271

← 1 2 3 4 5 →