Improved Light Soaking and Thermal Stability of Organic Solar Cells by Robust Interfacial Modification

The most widely used material in electron transport layers (ETL) of inverted organic solar cells (iOSCs) is zinc oxide (ZnO). However, the brittleness, inorganic nature, surface defects, and photocatalytic activity of ZnO lead to poor stability in iOSCs. Herein, the light-soaking and thermal stability of iOSCs are substantially improved by modifying ZnO surface with polyurethane diacrylate (SAR) or urethane acrylate (OCS)-based ultraviolet (UV) resins. The UV resins significantly reduce the energy barrier, suppress surface defects, and improve interfacial contact between ZnO ETL and the organic photoactive layer. Notably, the SAR and OCS resins mitigate the photocatalytic activity of ZnO, electrical leakage, and interfacial resistance during photoaging of OSCs. As a result, iOSCs based on modified ZnOs retain over 80% of initial efficiency under 1 sun illumination for light soaking 1000 h. Furthermore, SAR and OCS resins on ZnO surfaces form a robust crosslinked network with excellent solvent resistant properties, which result in enhanced thermal stability. These results reveal that this simple and effective approach is a promising procedure to fabricate high-performance iOSCs. Commercially available UV resins based on urethane acrylate are employed to appropriately modify ZnO surface in PM6:Y6-BO-based organic solar cells. Crosslinking UV resins effectively reduce the work function, surface defects, and photocatalytic activity of ZnO. As a result, the photovoltaic efficiency and light-soaking/thermal stability of organic solar cells with crosslinked UV resins are remarkably improved.image (c) 2024 WILEY-VCH GmbH