Durability Improvement of Pumice Lightweight Aggregate Concrete by Incorporating Modified Rubber Powder with Sodium Silicate

被引:1
|
作者
Wang, Hailong [1 ,2 ]
Shu, Libin [1 ]
Ma, Kuaile [3 ]
He, Xingxing [4 ]
机构
[1] Inner Mongolia Agr Univ, Coll Water Conservancy & Civil Engn, Hohhot 010018, Peoples R China
[2] Autonomous Reg Collaborat Innovat Ctr Integrated W, Hohhot 010018, Peoples R China
[3] Inner Mongolia Agr Univ, Vocat & Tech Coll, Dept Bldg Engn & Technol, Hohhot 014109, Peoples R China
[4] Tsinghua Univ, State Key Lab Hydrosci & Engn, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
sodium silicate; waste tire rubber powder; pumice lightweight aggregate concrete; freeze-thaw cycles; pore structure; fluid saturation; CEMENT; WATER;
D O I
10.3390/ma17040786
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
To improve the durability of pumice lightweight aggregate concrete applied in cold and drought areas, sodium silicate-modified waste tire rubber powder is used to treat the pumice lightweight aggregate concrete. The pumice lightweight aggregate concrete studied is mainly used in river lining structures. It will be eroded by water flow and the impact of ice and other injuries, resulting in reduced durability, and the addition of modified rubber will reduce the damage. The durability, including mass loss rate and relative dynamic elastic modulus of pumice lightweight aggregate concrete with different sodium silicate dosages and rubber power particle sizes, is analyzed under freeze-thaw cycles, and the microstructure is further characterized by using microscopic test methods such as nuclear magnetic resonance tests, ultra-depth 3D microscope tests, and scanning electron microscopy tests. The results showed that the durability of pumice lightweight aggregate concrete is significantly improved by the addition of modified waste tire rubber powder, and the optimum durability is achieved when using 2 wt% sodium silicate modified rubber power with a particle size of 20, and then the mass loss rate decreased from 4.54% to 0.77% and the relative dynamic elastic modulus increased from 50.34% to 64.87% after 300 freeze-thaw cycles compared with other samples. The scanning electron microscopy test result showed that the surface of rubber power is cleaner after the modification of sodium silicate, so the bonding ability between rubber power and cement hydration products is improved, which further improved the durability of concrete under the freeze-thaw cycle. The results of the nuclear magnetic resonance test showed that the pore area increased with the number of freeze-thaw cycles, and the small pores gradually evolved into large pores. The effect of sodium silicate on the modification of rubber power with different particle sizes is different. After the treatment of 2 wt% sodium silicate, the relationship between the increased rate of pore area and the number of freezing-thawing cycles is 23.8/times for the pumice lightweight aggregate concrete containing rubber power with a particle size of 20 and 35.3/times for the pumice lightweight aggregate concrete containing a particle size of 80 rubber power, respectively.
引用
收藏
页数:16
相关论文
共 50 条
  • [1] Lightweight concrete incorporating pumice based blended cement and aggregate: Mechanical and durability characteristics
    Hossain, K. M. A.
    Ahmed, S.
    Lachemi, M.
    CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (03) : 1186 - 1195
  • [2] The effect of pumice powder on the self-compactability of pumice aggregate lightweight concrete
    Kurt, Murat
    Gul, Muhammed Said
    Gul, Rustem
    Aydin, Abdulkadir Cuneyt
    Kotan, Turkay
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 103 : 36 - 46
  • [3] Evaluating the mechanical and durability properties of sustainable lightweight concrete incorporating the various proportions of waste pumice aggregate
    Aslam, Hafiz Muhammad Shahzad
    Rehman, Atteq Ur
    Onyelowe, Kennedy C.
    Noshin, Sadaf
    Yasin, Mazhar
    Khan, Muhammad Adil
    Latif, Abid
    Aslam, Hafiz Muhammad Usman
    Hussain, Shabeer
    RESULTS IN ENGINEERING, 2024, 24
  • [4] Durability of polymer-modified lightweight aggregate concrete
    Rossignolo, JA
    Agnesini, MC
    COMPOSITES IN CONSTRUCTION, 2001, : 61 - 66
  • [5] Durability of polymer-modified lightweight aggregate concrete
    Rossignolo, JA
    Agnesini, MVC
    CEMENT & CONCRETE COMPOSITES, 2004, 26 (04): : 375 - 380
  • [6] Lightweight Concrete Incorporating Volcanic Ash-Based Blended Cement and Pumice Aggregate
    Hossain, Khandaker M. Anwar
    Ahmed, Saifuddin
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2011, 23 (04) : 493 - 498
  • [7] The effects of gradation and admixture on the pumice lightweight aggregate concrete
    Sari, D
    Pasamehmetoglu, AG
    CEMENT AND CONCRETE RESEARCH, 2005, 35 (05) : 936 - 942
  • [8] THE DEVELOPMENT OF HIGH PERFORMANCE LIGHTWEIGHT PUMICE AGGREGATE CONCRETE
    Green, S. M. F.
    Brooke, N. J.
    PROCEEDINGS OF THE FIRST INTERNATIONAL POSTGRADUATE CONFERENCE ON INFRASTRUCTURE AND ENVIRONMENT, 2009, : 508 - 515
  • [9] Evaluation of Mechanical Properties of Lightweight Concrete with Pumice Aggregate
    Shafiq, Malik
    Khan, Fasih
    Badrashi, Yasir
    Khan, Fayaz
    Fahim, Muhammad
    Abbas, Asim
    Adil, Waqas
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2021, 15 (02) : 30 - 38
  • [10] Experimental study on lightweight concrete using pumice aggregate
    Karthika, R. B.
    Vidyapriya, V.
    Sri, K. V. Nandhini
    Beaula, K. Merlin Grace
    Harini, R.
    Sriram, Mithra
    MATERIALS TODAY-PROCEEDINGS, 2021, 43 : 1606 - 1613