Research on the permanent deformation mechanism and dynamic meso-mechanical response of porous asphalt mixture composite structure using the discrete element method

被引：2

作者：

Liu, Yanping ^{[1
]}

Xie, Jianguang ^{[1
]}

Wei, Dingbing ^{[2
]}

Tan, Yangwei ^{[1
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Dept Civil & Airport Engn, Nanjing 210016, Jiangsu, Peoples R China

[2] Jiangsu Open Univ, Sch Civil Engn & Architecture, Nanjing 210036, Jiangsu, Peoples R China

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2023年 / 407卷

关键词：

Permanent deformation mechanism; Dynamic meso-mechanical response; Porous asphalt mixture composite structure; Virtual rutting test model; Discrete element model; CONCRETE; PREDICTION; SIMULATION;

D O I：

10.1016/j.conbuildmat.2023.133531

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This study proposed a heterogeneous 3D virtual rutting model to investigate the rutting evolution mechanism and the dynamic meso-mechanical response of a porous asphalt mixture composite structure. The 3D virtual rutting test model incorporated a three-phase asphalt mastic-aggregate-airvoids system with grain size distribution and genuine aggregate morphology. Innovative algorithms were developed for cyclic rolling loading to reflect repetitive wheel loading. In contrast to the indoor rutting tests, the 3D virtual rutting tests exhibited greater rutting deformation and weaker dynamic stability in the range of 3.16%-10.17% and 2.65%-11.77%, respectively. Shear forces were predominant in the virtual rutting tests. As the porous asphalt mixture composite structure's surface layer thickness increased, the shear contact force increased and the maximum parallel-bond (PB) contact force diminished. The 3D virtual rutting test model was demonstrated to be feasible for simulating rutting deformation and dynamic meso-structural responses in porous asphalt mixtures with cyclic rolling loading algorithms.

引用

页数：19

共 18 条

[1] Discrete Element Modeling of the Meso-Mechanical Response of Asphalt Pavement under Vehicle Load
Zhang, Dong
Wu, Chunying
Cai, Lili
Bian, Jiang
Yin, Chaoen
MATERIALS, 2022, 15 (21)
[2] Study on the influence of coarse aggregate morphology on the meso-mechanical properties of asphalt mixtures using discrete element method
Li, Xiongxin
Shi, Liwan
Liao, Weijie
Wang, Yuechan
Nie, Wen
CONSTRUCTION AND BUILDING MATERIALS, 2024, 426
[3] Exploring mechanical failure of porous electrode meso structure using the discrete element method
Wang, Zenghui
Yang, Le
Zhu, Shengxin
Song, Wei-Li
Chen, Hao-Sen
EXTREME MECHANICS LETTERS, 2021, 46
[4] Meso-mechanical modelling of damage in concrete using discrete element method with porous ITZs of defined width around aggregates
Nitka, M.
Tejchman, J.
ENGINEERING FRACTURE MECHANICS, 2020, 231
[5] Meso-structure of crumb rubber asphalt mixture based on discrete element method
Chen, Y. (cyz740513@ncwu.edu.cn), 1600, Harbin Institute of Technology (45):
[6] Investigation of asphalt mixture permanent deformation based on three-dimensional discrete element method
Wang, Hui
Zhou, Zhenghui
Huang, Weilin
Dong, Xinyu
CONSTRUCTION AND BUILDING MATERIALS, 2021, 272
[7] Investigating the packing condition of porous asphalt mixture using Discrete Element Method
Chen, Mengjia
Wong, Yiik Diew
CONSTRUCTION MATERIALS AND STRUCTURES, 2014, : 629 - 636
[8] Micromechanical simulation of porous asphalt mixture compaction using discrete element method (DEM)
Al Khateeb, Loay
Anupam, Kumar
Erkens, Sandra
Scarpas, Tom
CONSTRUCTION AND BUILDING MATERIALS, 2021, 301
[9] Effects of Aggregate Mesostructure on Permanent Deformation of Asphalt Mixture Using Three-Dimensional Discrete Element Modeling
Zhang, Deyu
Gu, Linhao
Zhu, Junqing
MATERIALS, 2019, 12 (21)
[10] Evaluation of the development of aggregate packing in porous asphalt mixture using discrete element method simulation
Chen, M. J.
Wong, Y. D.
ROAD MATERIALS AND PAVEMENT DESIGN, 2017, 18 (01) : 64 - 85

← 1 2 →