Mechanics, durability, and microstructure analysis of marine soil stabilized by an eco-friendly calcium carbide residue-activated coal gangue geopolymer

Constructing infrastructure on soft soils demands the implementation of ground improvement. This study proposed an eco-friendly method of stabilizing marine soil using a calcium carbide residue (CCR)-activated coal gangue (CG) geopolymer derived from industrial waste. Laboratory experiments were conducted to investigate the mechanical properties, durability performance, and stabilization mechanisms of stabilized marine soils under multiple wetting-dry cycles. The results highlighted the effectiveness of CG-CCR geopolymer by a content of 15% to achieve satisfactory strength gain over the engineering requirements. However, the largest decrease in strength (71.89%) was observed when the initial water content was beyond 1.5 times the liquid limit (LL). The optimum solution was proposed to have a geopolymer content of 15% or an initial water content of 1.25 & sdot;LL to exhibit the highest resistance to strength decay after 12 cycles. Compared with water intrusion, mass loss had a more significant effect on soil strength deterioration. The formation of noncrystalline or amorphous-phase reaction products effectively filled intergranular pores and reduced the void space between soil particles, improving the mechanical properties. The CG-CCR geopolymer was demonstrated to offer a promising solution for soil improvement in geotechnical engineering and waste reduction in industry as a soil stabilizer.