Development of a Method for Chemical Polishing of 08Kh18N10 (AISI 304) Stainless Steel with a Nanostructured Medium

被引：2
|
作者：
Tyulagin, P. E. [1 ]
Mishina, E. S. [1 ]
Polyakova, A. S. [1 ]
Murashova, N. M. [1 ]
Muradova, A. G. [1 ]
机构：
[1] Mendeleev Univ Chem Technol Russia, Moscow 125047, Russia
来源：
RUSSIAN JOURNAL OF INORGANIC CHEMISTRY | 2023年 / 68卷 / 05期
关键词：
chemical polishing; microemulsion; microrelief; SURFACE-ROUGHNESS; REVERSE MICROEMULSIONS; NANOPARTICLES; METALS; HCL;
D O I：
10.1134/S0036023623600570
中图分类号：
O61 [无机化学];
学科分类号：
070301 ; 081704 ;
摘要：
Chemical polishing of metals with nanostructured media, such as water-in-oil (w/o) microemulsions, is of interest for improving the procedure of polishing metals with concentrated acids because the etchant (acid) concentration in the microemulsions can be much lower. It was shown that w/o microemulsions in the sodium dodecyl sulfate-1-butanol-kerosene-aqueous HCl system can be used for chemical polishing of 08Kh18N10 (AISI 304) stainless steel. Regions of existence of microemulsion in this system were determined, and conditions of chemical polishing of stainless steel with a sodium dodecyl sulfate microemulsion were chosen. Conditions of cleaning of the surface of a stainless-steel sample after chemical polishing were selected so that to ensure the most complete removal of microemulsion components from the steel surface without changing the surface microrelief.
引用
收藏
页码：610 / 620
页数：11
相关论文
共 50 条
  • [1] Development of a Method for Chemical Polishing of 08Kh18N10 (AISI 304) Stainless Steel with a Nanostructured Medium
    P. E. Tyulagin
    E. S. Mishina
    A. S. Polyakova
    N. M. Murashova
    A. G. Muradova
    Russian Journal of Inorganic Chemistry, 2023, 68 : 610 - 620
  • [2] Wear Resistance of Glow-Discharge Nitride 08Kh18N10 Steel
    Stechyshyn, M. S.
    Skyba, M. Ye.
    Stechyshyna, N. M.
    Mashovets, N. S.
    Medvedchuk, N. K.
    MATERIALS SCIENCE, 2023, 59 (02) : 249 - 255
  • [3] Effect of Specific Magnetic Susceptibility of AISI 304 and 08Kh18N10 Steels on Their Limiting Potentials in Chloride-Containing Environments
    Narivskyi, O. E.
    Snizhnoi, G. V.
    Pulina, T. V.
    Snizhnoi, V. L.
    Solidor, N. A.
    MATERIALS SCIENCE, 2024, 59 (06) : 649 - 657
  • [4] Wear Resistance of Glow-Discharge Nitride 08Kh18N10 Steel
    M. S. Stechyshyn
    M. Ye. Skyba
    N. M. Stechyshyna
    N. S. Mashovets
    N. K. Medvedchuk
    Materials Science, 2023, 59 (2) : 249 - 255
  • [5] INFLUENCE OF MANGANESE ON THE OXIDATION OF STEEL 08KH18N10 IN HIGH-PURITY GRADE HELIUM
    FILATOV, VM
    KUZNETSOV, EV
    RYABCHENKOV, AV
    PROTECTION OF METALS, 1982, 18 (04): : 469 - 472
  • [6] Effect of Alternating Cold Elastoplastic Deformation on Austenitic Decomposition during Tension of 08Kh18N10 Steel
    A. E. Shelest
    V. S. Yusupov
    M. M. Perkas
    S. O. Muradyan
    M. A. Kaplan
    Russian Metallurgy (Metally), 2022, 2022 : 29 - 34
  • [7] Effect of Long-Term Exposures at Elevated Temperature on Evolution of 08Kh18N10Т Steel Structure
    Chulikova, Zh. E.
    Ovchinnikov, V. V.
    INORGANIC MATERIALS-APPLIED RESEARCH, 2024, 15 (04) : 1138 - 1146
  • [8] Effect of Alternating Cold Elastoplastic Deformation on Austenitic Decomposition during Tension of 08Kh18N10 Steel
    Shelest, A. E.
    Yusupov, V. S.
    Perkas, M. M.
    Muradyan, S. O.
    Kaplan, M. A.
    RUSSIAN METALLURGY, 2022, 2022 (01): : 29 - 34
  • [9] Comparative electrochemical study of 08H18N10T, AISI 304 and AISI 316L stainless steels
    Kerner, Zsolt
    Horvath, Akos
    Nagy, Gabor
    ELECTROCHIMICA ACTA, 2007, 52 (27) : 7529 - 7537
  • [10] Effect of Carbon in a Metal and Coke Additives to a Slag before Oxidation Vacuum Degassing of 08Kh18N10 Steel on the Chromium Losses
    Muratov, E.V.
    Podkur, S.V.
    Semin, A.E.
    Kotel’nikov, G.I.
    Durynin, V.A.
    Russian Metallurgy (Metally), 2024, 2024 (06) : 1252 - 1261
12345