Modal and stress behavioral for CFRP composite lifting lug

被引:0
|
作者
Soliman, Ehab Samir Mohamed Mohamed [1 ]
机构
[1] Egyptian Russian Univ, Fac Engn, Mechatron & Robot Engn Dept, Badr City, Egypt
关键词
Lifting lug; Composite; Failure; Natural frequency; Strength; LARGE-DIAMETER; HEAVY WALL; DESIGN; PREDICTION; ERECTION; VESSEL;
D O I
10.1108/WJE-08-2023-0312
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Purpose - In the present study, a steel lifting lug is replaced with a composite (carbon fiber-reinforced epoxy [CFRP]) lifting lug made of a carbon/epoxy composite. The purpose of this paper was to obtain a composite lifting lug with a higher level of strength that is capable of carrying loads without failure. Design/methodology/approach - The vibration and static behaviors of steel and composite lifting lugs have been investigated using finite element analysis (FEA), ANSYS software. The main consideration in the design of the composite (CFRP) lifting lug was that the displacement of both steel and composite lugs was the same under the same load. Hence, by using the FEA displacement result of the steel lifting lug, the thickness of the composite lifting lug is determined using FEA. Findings - Compared to the steel lifting lug, the composite (CFRP) lifting lug has much lower stresses and much higher natural frequencies. Static behavior was experienced by the composite lifting lug, showing a reduction in von Mises stress, third principal stress and XZ shear stress, respectively, by 48.4%, 34.6% and 89.8%, respectively, when compared with the steel lifting lug. A higher natural frequency of mode shape swaying in X (258.976 root 1,000 Hz) was experienced by the composite lifting lug when compared to the steel lifting lug (195.935 root 1,000 Hz). The safe strength of the design composite lifting lug has been proven by FEA results, which showed that the composite (CFRP) lifting lug has a higher factor of safety in all developed stresses than the steel lifting lug. According to von Mises stress, the factor of safety of the composite lifting lug is increased by 76% when compared to the steel lifting lug. The von Mises stress at the edge of the hole in the composite lifting lug is reduced from 23.763 MPa to 20.775 MPa when compared to the steel lifting lug. Originality/value - This work presents the designed composite (CFRP) lifting lug, which will be able to carry loads with more safety than a steel one.
引用
收藏
页码:307 / 321
页数:15
相关论文
共 50 条
  • [1] Lifting Lug with Pinhole Bushing
    Duerr, David
    PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION, 2018, 23 (02)
  • [2] Efficient manufacturing techniques and connection failure analysis of CFRP lifting lug for main bearing structure
    Min, Wei
    Liu, Yang
    Cheng, Lele
    Sun, Yuanrong
    Qi, Liangliang
    Wan, Yujia
    Yu, Muhuo
    Sun, Zeyu
    ENGINEERING FAILURE ANALYSIS, 2023, 151
  • [3] Lifting Lug with Pinhole Bushing (vol 23, , 2018)
    Duerr, David
    PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION, 2019, 24 (04)
  • [4] Influence on properties of base metal after elimination of lifting-lug member in a dissimilar welding between steel base and steel lifting lug
    Park, Jeongung
    An, Gyubaek
    Lee, Haewoo
    INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING, 2019, 11 (02) : 858 - 864
  • [5] The basic structural design guides on the lifting lug of ship block
    Ham, JH
    PROCEEDINGS OF THE EIGHTH INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, 1998, : 274 - 283
  • [6] Modal frequency and damping analysis of tow steered CFRP composite plates
    Pereira, D. A.
    Guimaraes, T. A. M.
    Rade, D. A.
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018), 2018, : 2223 - 2238
  • [7] Dynamic Analysis of Lifting Lug of Equipment Under High Speed EMU
    Ding, Jie
    Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University, 2024, 59 (01): : 168 - 176
  • [8] PILGRIM STATION STEAM SEPARATOR LIFTING LUG MATERIAL EVALUATION AND ANALYSIS
    Woods, Katie E.
    Frew, Brian D.
    Rui, Yuting
    Mehta, Hardayal S.
    Giannuzzi, Anthony
    Gustin, Hal
    Pace, Raymond M.
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2014, VOL 6B, 2014,
  • [9] Failure analysis on cracking of backing plate of lifting lug for air preheater
    Lv, Fuwei
    Hu, Xiaodong
    Ma, Chongbin
    Yang, Bin
    Luo, Yun
    ENGINEERING FAILURE ANALYSIS, 2020, 109 (109)
  • [10] Optimum Design of Lug Arrangement Based on Static and Dynamic Analyses for Block Lifting
    Lee, Sung-Min
    Roh, Myung-Il
    Kim, Ki-Su
    Ham, Seung-Ho
    JOURNAL OF SHIP PRODUCTION AND DESIGN, 2018, 34 (02): : 119 - 133