Modifying the Fiber Structure and Filtration Performance of Polyester Materials Based on Two Different Preparation Methods

How to build a satisfactory indoor environment has become increasingly important. In this paper, the synthesis and improvement of the most widely used polyester materials in China were carried out based on two different preparation methods, and the structures and filtration performances were tested and analyzed. The results showed that a carbon black coating was wrapped on the surfaces of the new synthetic polyester filter fibers. Compared with the original materials, the filtration efficiencies of PM10, PM2.5, and PM1 were increased by 0.88-6.26, 1.68-8.78, and 0.42-4.84%, respectively. The best filtration velocity was 1.1 m/s, and the new synthetic polyester materials with direct impregnation demonstrated superior filtration performance. The filtration efficiency of the new synthetic polyester materials was improved on the particulates with sizes of 1.0-5.0 mu m. The filtration performance of G4 was better than that of G3. The filtration efficiencies of PM10, PM2.5, and PM1 were improved by 4.89, 4.20, and 11.69%, respectively. The quality factor value can be used to assess the comprehensive filtration performance of air filters in practical applications. It could provide reference values for the selection of synthetic methods of new filter materials.